Produkt Namme:Carbide bramen yn dûbele cut
Materiaal:hurde alloy, cemented carbid, wolfraam stiel
tichtens: 14.5-14.8 g/cm3
Hardheid: HRA89-90
Type:Single cut, dûbele cut, aluminium cut
Beskriuwing:
Us Tungsten Carbide Burrs, de ultime cutting oplossing foar presyzje en effisjinsje. Makke mei sekuere oandacht foar detail, ús burrs binne ûntworpen om jo ferwachtingen te oertsjûgjen en treflike prestaasjes te leverjen yn in breed skala oan tapassingen.
Yn 'e kearn fan ús burrs leit de útsûnderlike kwaliteit fan wolfraam carbid, in materiaal ferneamd om syn hurdens, duorsumens, en waarmte ferset. Dit soarget derfoar dat ús burrs har skerpte en yntegriteit behâlde, sels yn 'e meast easkenste snijtaken, en jouwe jo langduorjende betrouberens en superieure resultaten.
Us wolfraam carbid bramen binne te krijen yn in ferskaat oan foarmen en maten om te foldwaan oan jo spesifike behoeften. Fan silindryske, balfoarmige en beamfoarmige burrs oant flammen, ovale en spitse-ein-ûntwerpen, biede wy in wiidweidige seleksje om elke snij- of foarmjende taak mei gemak en presyzje oan te pakken.
| 1. "SC" stiet foar single fluit. Mear skerper as brûkt mei ferwurke metalen filamentous |
| 2. "SM" stiet foar dûbele fluiten. Goede waarmte dissipaasje mei ferwurke metalen korrelige |
| 3. "AC" stiet foar Rough flute. Wurdt brûkt om aluminium, koper en oare sêftere non-ferro metalen te bewurkjen. |
| 4. Wy kinne skankdiameter meitsje om 1/8 ", 1/4", 8.0mm en 10.0mm te meitsjen |
| 5. wy kinne de totale lingte 100, 150, 200, 250, 300 meitsje |
|
| Ofbylding | Sylindrysk type A | ienheid: mm |
| Kop diameter | Cutting diel lingte | Shank diameter | Totale Lengte |
 Ofbylding | A0313-SC | 3 | 13 | 3 | 38 |
| A0616-SC | 6 | 16 | 6 | 61 |
| A0820-SC | 8 | 20 | 6 | 65 |
| A1020-SC | 10 | 20 | 6 | 65 |
| A1225-SC | 12 | 25 | 6 | 70 |
| A1625-SC | 16 | 25 | 6 | 70 |
| A0313-SM | 3 | 13 | 3 | 38 |
| A0616-SM | 6 | 16 | 6 | 61 |
| A0820-SM | 8 | 20 | 6 | 65 |
| A1020-SM | 10 | 20 | 6 | 65 |
| A1225-SM | 12 | 25 | 6 | 70 |
| A1625-SM | 16 | 25 | 6 | 70 |
| A0313-AC | 3 | 13 | 3 | 38 |
| A0616-AC | 6 | 16 | 6 | 61 |
| A0820-AC | 8 | 20 | 6 | 65 |
| A1020-AC | 10 | 20 | 6 | 65 |
| A1225-AC | 12 | 25 | 6 | 70 |
| A1625-AC | 16 | 25 | 6 | 70 |
| Silindrysk mei ein tosken, Type B | ienheid: mm | Kop diameter |
| Cutting diel lingte | Shank diameter | Totale Lengte | Ofbylding |
 Sferosylindrysk, Type C | B0313-SC | 3 | 13 | 3 | 38 |
| B0616-SC | 6 | 16 | 6 | 61 |
| B0820-SC | 8 | 20 | 6 | 65 |
| B1020-SC | 10 | 20 | 6 | 65 |
| B1225-SC | 12 | 25 | 6 | 70 |
| B1625-SC | 16 | 25 | 6 | 70 |
| B0313-SM | 3 | 13 | 3 | 38 |
| B0616-SM | 6 | 16 | 6 | 61 |
| B0820-SM | 8 | 20 | 6 | 65 |
| B1020-SM | 10 | 20 | 6 | 65 |
| B1225-SM | 12 | 25 | 6 | 70 |
| B1625-SM | 16 | 25 | 6 | 70 |
| B0313-AC | 3 | 13 | 3 | 38 |
| B0616-AC | 6 | 16 | 6 | 61 |
| B0820-AC | 8 | 20 | 6 | 65 |
| B1020-AC | 10 | 20 | 6 | 65 |
| B1225-AC | 12 | 25 | 6 | 70 |
| B1625-AC | 16 | 25 | 6 | 70 |
| ienheid: mm | Kop diameter | Cutting diel lingte |
| Shank diameter | Totale Lengte | Ofbylding | Sferysk, Type D |
 ienheid: mm | C0313-SC | 3 | 13 | 3 | 38 |
| C0616-SC | 6 | 16 | 6 | 61 |
| C0820-SC | 8 | 20 | 6 | 65 |
| C1020-SC | 10 | 20 | 6 | 65 |
| C1225-SC | 12 | 25 | 6 | 70 |
| C1625-SC | 16 | 25 | 6 | 70 |
| C0313-SM | 3 | 13 | 3 | 38 |
| C0616-SM | 6 | 16 | 6 | 61 |
| C0820-SM | 8 | 20 | 6 | 65 |
| C1020-SM | 10 | 20 | 6 | 65 |
| C1225-SM | 12 | 25 | 6 | 70 |
| C1625-SM | 16 | 25 | 6 | 70 |
| C0313-AC | 3 | 13 | 3 | 38 |
| C0616-AC | 6 | 16 | 6 | 61 |
| C0820-AC | 8 | 20 | 6 | 65 |
| C1020-AC | 10 | 20 | 6 | 65 |
| C1225-AC | 12 | 25 | 6 | 70 |
| C1625-AC | 16 | 25 | 6 | 70 |
| Kop diameter | Cutting diel lingte | Shank diameter |
| Totale Lengte | Ofbylding | Oval, Type E | ienheid: mm |
 Kop diameter | D0303-SC | 3 | 3 | 3 | 38 |
| D0605-SC | 6 | 5 | 6 | 50 |
| D0807-SC | 8 | 7 | 6 | 52 |
| D1009-SC | 10 | 9 | 6 | 54 |
| D1210-SC | 12 | 10 | 6 | 55 |
| D1614-SC | 16 | 14 | 6 | 60 |
| D0303-SM | 3 | 3 | 3 | 38 |
| D0605-SM | 6 | 5 | 6 | 50 |
| D0807-SM | 8 | 7 | 6 | 52 |
| D1009-SM | 10 | 9 | 6 | 54 |
| D1210-SM | 12 | 10 | 6 | 55 |
| D1614-SM | 16 | 14 | 6 | 60 |
| D0303-AC | 3 | 3 | 3 | 38 |
| D0605-AC | 6 | 5 | 6 | 50 |
| D0807-AC | 8 | 7 | 6 | 52 |
| D1009-AC | 10 | 9 | 6 | 54 |
| D1210-AC | 12 | 10 | 6 | 55 |
| D1614-AC | 16 | 14 | 6 | 60 |
| Cutting diel lingte | Shank diameter | Totale Lengte |
| Ofbylding | Hyperbolysk mei in sferysk ein, Type F | ienheid: mm | Kop diameter |
 Cutting diel lingte | E0610-SC | 6 | 10 | 6 | 55 |
| E0813-SC | 8 | 13 | 6 | 58 |
| E1016-SC | 10 | 16 | 6 | 61 |
| E1220-SC | 12 | 20 | 6 | 65 |
| E1625-SC | 16 | 25 | 6 | 70 |
| E0306-SM | 3 | 6 | 3 | 38 |
| E0610-SM | 6 | 10 | 6 | 55 |
| E0813-SM | 8 | 13 | 6 | 58 |
| E1016-SM | 10 | 16 | 6 | 61 |
| E1220-SM | 12 | 20 | 6 | 65 |
| E1625-SM | 16 | 25 | 6 | 70 |
| E0306-AC | 3 | 6 | 3 | 38 |
| E0610-AC | 6 | 10 | 6 | 55 |
| E0813-AC | 8 | 13 | 6 | 58 |
| E1016-AC | 10 | 16 | 6 | 61 |
| E1220-AC | 12 | 20 | 6 | 65 |
| E1625-AC | 16 | 25 | 6 | 70 |
| Shank diameter | Totale Lengte | Ofbylding |
| Hyperbolysk mei punt ein, Type G | ienheid: mm | Kop diameter | Cutting diel lingte |
 Shank diameter | F0313-SC | 3 | 13 | 3 | 38 |
| F0618-SC | 6 | 18 | 6 | 63 |
| F0820-SC | 8 | 20 | 6 | 65 |
| F1020-SC | 10 | 20 | 6 | 65 |
| F1225-SC | 12 | 25 | 6 | 70 |
| F1625-SC | 16 | 25 | 6 | 70 |
| F0313-SM | 3 | 13 | 3 | 38 |
| F0618-SM | 6 | 18 | 6 | 63 |
| F0820-SM | 8 | 20 | 6 | 65 |
| F1020-SM | 10 | 20 | 6 | 65 |
| F1225-SM | 12 | 25 | 6 | 70 |
| F1625-SM | 16 | 25 | 6 | 70 |
| F0313-AC | 3 | 13 | 3 | 38 |
| F0618-AC | 6 | 18 | 6 | 63 |
| F0820-AC | 8 | 20 | 6 | 65 |
| F1020-AC | 10 | 20 | 6 | 65 |
| F1225-AC | 12 | 25 | 6 | 70 |
| F1625-AC | 16 | 25 | 6 | 70 |
| Totale Lengte | Ofbylding | Flame-like Type H |
| ienheid: mm | Kop diameter | Cutting diel lingte | Shank diameter |
 Totale Lengte | G0313-SC | 3 | 13 | 3 | 38 |
| G0618-SC | 6 | 18 | 6 | 63 |
| G0820-SC | 8 | 20 | 6 | 65 |
| G1020-SC | 10 | 20 | 6 | 65 |
| G1225-SC | 12 | 25 | 6 | 70 |
| G1625-SC | 16 | 25 | 6 | 70 |
| G0313-SM | 3 | 13 | 3 | 38 |
| G0618-SM | 6 | 18 | 6 | 63 |
| G0820-SM | 8 | 20 | 6 | 65 |
| G1020-SM | 10 | 20 | 6 | 65 |
| G1225-SM | 12 | 25 | 6 | 70 |
| G1625-SM | 16 | 25 | 6 | 70 |
| G0313-AC | 3 | 13 | 3 | 38 |
| G0618-AC | 6 | 18 | 6 | 63 |
| G0820-AC | 8 | 20 | 6 | 65 |
| G1020-AC | 10 | 20 | 6 | 65 |
| G1225-AC | 12 | 25 | 6 | 70 |
| G1625-AC | 16 | 25 | 6 | 70 |
| Ofbylding | Countersink, Type J | ienheid: mm |
| Kop diameter | Cutting diel lingte | Shank diameter | Totale Lengte |
 Ofbylding | H0307-SC | 3 | 7 | 3 | 52 |
| H0618-SC | 6 | 18 | 6 | 63 |
| H0820-SC | 8 | 20 | 6 | 65 |
| H1025-SC | 10 | 25 | 6 | 70 |
| H1232-SC | 12 | 32 | 6 | 77 |
| H1636-SC | 16 | 36 | 6 | 81 |
| H0307-SM | 3 | 7 | 3 | 52 |
| H0618-SM | 6 | 18 | 6 | 63 |
| H0820-SM | 8 | 20 | 6 | 65 |
| H1025-SM | 10 | 25 | 6 | 70 |
| H1232-SM | 12 | 32 | 6 | 77 |
| H1636-SM | 16 | 36 | 6 | 81 |
| H0307-AC | 3 | 7 | 3 | 52 |
| H0618-AC | 6 | 18 | 6 | 63 |
| H0820-AC | 8 | 20 | 6 | 65 |
| H1025-AC | 10 | 25 | 6 | 70 |
| H1232-AC | 12 | 32 | 6 | 77 |
| H1636-AC | 16 | 36 | 6 | 81 |
| Sfero-kegel, Type L | ienheid: mm | Kop diameter |
| Cutting diel lingte | Shank diameter | Totale Lengte | |
 | J0302-SC | 3 | 2 | 3 | 38 |
| J0605-SC | 6 | 5 | 6 | 55 |
| J0807-SC | 8 | 7 | 6 | 57 |
| J1008-SC | 10 | 8 | 6 | 58 |
| J1210-SC | 12 | 10 | 6 | 60 |
| J1613-SC | 16 | 13 | 6 | 62 |
| J0302-SM | 3 | 2 | 3 | 38 |
| J0605-SM | 6 | 5 | 6 | 55 |
| J0807-SM | 8 | 7 | 6 | 57 |
| J1008-SM | 10 | 8 | 6 | 58 |
| J1210-SM | 12 | 10 | 6 | 60 |
| J1613-SM | 16 | 13 | 6 | 62 |
 | K0301-SC | 3 | 1.5 | 3 | 38 |
| K0603-SC | 6 | 3 | 6 | 51 |
| K0804-SC | 8 | 4 | 6 | 54 |
| K1005-SC | 10 | 5 | 6 | 55 |
| K1206-SC | 12 | 6 | 6 | 57 |
| K1608-SC | 16 | 8 | 6 | 60 |
| K0301-SM | 3 | 1.5 | 3 | 38 |
| K0603-SM | 6 | 3 | 6 | 51 |
| K0804-SM | 8 | 4 | 6 | 54 |
| K1005-SM | 10 | 5 | 6 | 55 |
| K1206-SM | 12 | 6 | 6 | 57 |
| K1608-SM | 16 | 8 | 6 | 60 |
| | |
| | | |
 | L0313-SC | 3 | 13 | 3 | 38 |
| L0616-SC | 6 | 16 | 6 | 61 |
| L0822-SC | 8 | 22 | 6 | 67 |
| L1025-SC | 10 | 25 | 6 | 70 |
| L1228-SC | 12 | 28 | 6 | 73 |
| L1633-SC | 16 | 33 | 6 | 78 |
| L0313-SM | 3 | 13 | 3 | 38 |
| L0616-SM | 6 | 16 | 6 | 61 |
| L0822-SM | 8 | 22 | 6 | 67 |
| L1025-SM | 10 | 25 | 6 | 70 |
| L1228-SM | 12 | 28 | 6 | 73 |
| L1633-SM | 16 | 33 | 6 | 78 |
| L0313-AC | 3 | 13 | 3 | 38 |
| L0616-AC | 6 | 16 | 6 | 61 |
| L0822-AC | 8 | 22 | 6 | 67 |
| L1025-AC | 10 | 25 | 6 | 70 |
| L1228-AC | 12 | 28 | 6 | 73 |
| L1633-AC | 16 | 33 | 6 | 78 |
 | M0316-SC | 3 | 16 | 3 | 38 |
| M0618-SC | 6 | 18 | 6 | 63 |
| M0820-SC | 8 | 20 | 6 | 65 |
| M1020-SC | 10 | 20 | 6 | 65 |
| M1225-SC | 12 | 25 | 6 | 70 |
| M1625-SC | 16 | 25 | 6 | 70 |
| M0316-SM | 3 | 16 | 3 | 38 |
| M0618-SM | 6 | 18 | 6 | 63 |
| M0820-SM | 8 | 20 | 6 | 65 |
| M1020-SM | 10 | 20 | 6 | 65 |
| M1225-SM | 12 | 25 | 6 | 70 |
| M1625-SM | 16 | 25 | 6 | 70 |
| M0316-AC | 3 | 16 | 3 | 38 |
| M0618-AC | 6 | 18 | 6 | 63 |
| M0820-AC | 8 | 20 | 6 | 65 |
| M1020-AC | 10 | 20 | 6 | 65 |
| M1225-AC | 12 | 25 | 6 | 70 |
| M1625-AC | 16 | 25 | 6 | 70 |
 | N0304-SC | 3 | 4 | 3 | 38 |
| N0607-SC | 6 | 7 | 6 | 52 |
| N0809-SC | 8 | 9 | 6 | 54 |
| N1011-SC | 10 | 11 | 6 | 56 |
| N1213-SC | 12 | 13 | 6 | 58 |
| N1616-SC | 16 | 16 | 6 | 61 |
| N0304-SM | 3 | 4 | 3 | 38 |
| N0607-SM | 6 | 7 | 6 | 52 |
| N0809-SM | 8 | 9 | 6 | 54 |
| N1011-SM | 10 | 11 | 6 | 56 |
| N1213-SM | 12 | 13 | 6 | 58 |
| N1616-SM | 16 | 16 | 6 | 61 |
| N0304-AC | 3 | 4 | 3 | 38 |
| N0607-AC | 6 | 7 | 6 | 52 |
| N0809-AC | 8 | 9 | 6 | 54 |
| N1011-AC | 10 | 11 | 6 | 56 |
| N1213-AC | 12 | 13 | 6 | 58 |
| N1616-AC | 16 | 16 | 6 | 61 |
Wêrom kieze foar ús:
1. Jo kinne it perfekte materiaal krije neffens jo eask op 'e minste mooglike priis.
2. Wy biede ek Reworks, FOB, CFR, CIF, en doar nei doar leveringsprizen. Wy riede jo oan om deal te dwaan foar ferstjoering dy't frij ekonomysk sil wêze.
3. De materialen dy't wy leverje binne folslein kontrolearber, direkt fan grûnstoftestsertifikaat oant de definitive diminsjonele ferklearring. (Rapporten sille sjen op eask)
4. e garânsje om binnen 24 oeren in antwurd te jaan (meastentiids yn itselde oere)
5. Jo kinne krije stock alternativen, mûne leveringen mei minimalisearjen manufacturing tiid.
6. Wy binne folslein wijd oan ús klanten. As it net mooglik is om te foldwaan oan jo easken nei it ûndersiikjen fan alle opsjes, sille wy jo net misleide troch falske beloften te meitsjen dy't goede klantrelaasjes sille meitsje.
Fabriken & Tentoanstellingen
KONTAKT MEI ÚS OPNIMME
Tillefoan&Wechat&Whatsup: +8618707335571
Enkête:info@retopcarbide.com
