NINAU
  • Hoʻopaʻa ʻia ke apo Mechanical Carbide Seal
  • Hoʻopaʻa ʻia ke apo Mechanical Carbide Seal
  • Hoʻopaʻa ʻia ke apo Mechanical Carbide Seal
  • Hoʻopaʻa ʻia ke apo Mechanical Carbide Seal
  • Hoʻopaʻa ʻia ke apo Mechanical Carbide Seal
  • Hoʻopaʻa ʻia ke apo Mechanical Carbide Seal

Hoʻopaʻa ʻia ke apo Mechanical Carbide Seal

Hoʻolālā ʻia no ka nui o nā noi, ʻo kā mākou Mechanical Carbide Seal Ring he mea hoʻonaninani i ʻoi aku ka maikaʻi ma nā ʻoihana like ʻole, me ka automotive, manufacturing, oil and gas, a me nā mea hou aku. Hoʻonohonoho pono ʻia ia e hāʻawi i kahi mīkini hoʻopaʻa hilinaʻi hilinaʻi, pale i ka leakage a mālama i ka hana maikaʻi loa i nā kaiapuni koi.
  • NUI PAPA

Inoa mea kūʻai:Hoʻopaʻa ʻia ke apo Mechanical Carbide Seal


wehewehe:

ʻO Corrosion Resistant Mechanical Carbide Seal Ring - kahi hopena hilinaʻi a kiʻekiʻe e hoʻomaikaʻi i ka pono a me ka lōʻihi o kāu mīkini. Hoʻopili maikaʻi ʻia kēia apo sila me ka hoʻohana ʻana i nā mea carbide kiʻekiʻe, e hōʻoiaʻiʻo ana i ka paʻa a me ke kūʻē ʻana i ka lole a me ka waimaka.


Hoʻolālā ʻia no ka nui o nā noi, ʻo kā mākou Mechanical Carbide Seal Ring he mea hoʻonaninani i ʻoi aku ka maikaʻi ma nā ʻoihana like ʻole, me ka automotive, manufacturing, oil and gas, a me nā mea hou aku. Hoʻonohonoho pono ʻia ia e hāʻawi i kahi mīkini hoʻopaʻa hilinaʻi hilinaʻi, pale i ka leakage a mālama i ka hana maikaʻi loa i nā kaiapuni koi.


undefinedundefinedundefined


Papa Papa no na apo Mechanical:



Papa

Nikela
Maʻiʻo
Ni%

ʻO ka mānoanoa
g/cm³

ʻoʻoleʻa
(HRA)

TRS
(MPa)

Ka nui o ka palaoa
(um)
YN66.014.8292.021500.8
YN88.014.8091.522000.8
YN1010.014.6090.523500.8
YN1414.014.1588.823001.0
YN2020.014.1088.524000.8


Nā mea nui:

ʻO ke kūpaʻa kiʻekiʻe: Hana ʻia mai nā mea carbide premium, hōʻike kā mākou apo seal i ka ikaika koʻikoʻi a me ke kūpaʻa, hiki iā ia ke kū i nā puʻe kiʻekiʻe, nā wela wela, a me nā kūlana abrasive. Hoʻopaʻa ia i ka hana lōʻihi, hoʻemi i ka manawa haʻahaʻa a hoʻemi i nā kumukūʻai mālama.


Hoʻonui ʻia ka maikaʻi o ka hoʻopaʻa ʻana:ʻO ka hoʻolālā pololei a me ka ʻenekinia o kā mākou Mechanical Carbide Seal Ring e hōʻoiaʻiʻo i kahi hana hoʻopaʻa paʻa. Hāʻawi ia i kahi sila paʻa a paʻa, pale i ka leakage o nā wai, nā kinoea, a i ʻole nā ​​​​mea haumia, a me ka hoʻoikaika ʻana i ka hana kūpono a me ka hana maikaʻi loa.


Nā mea hoʻohana like ʻole:ʻO kā mākou apo seal he kūpono ia no ka nui o nā mīkini a me nā mea hana, me nā pumps, compressors, turbines, engines, a me nā mea hou aku. ʻO kona kūpono a me ka hoʻohālikelike ʻana he koho kūpono ia no nā noi ʻoihana like ʻole, e hōʻoiaʻiʻo ana i ka hoʻohui pono ʻana a me ka hana maikaʻi loa.


Nā koho hiki ke hoʻopilikino ʻia:Hoʻomaopopo mākou he mau koi kūikawā kēlā me kēia papahana. No laila, hāʻawi mākou i nā koho maʻamau no kā mākou Mechanical Carbide Seal Ring, e ʻae iā ʻoe e koho i nā ana a me nā kikoʻī i kūpono i kāu mau pono kikoʻī. Ua mākaukau kā mākou hui loea e kōkua iā ʻoe i ka hana ʻana i ke apo sila e hoʻokō i kāu mau koi pono.


Hoʻokomo maʻalahi a mālama ʻia:Hoʻolālā ʻia kā mākou apo seal no ka maʻalahi o ka hoʻonohonoho ʻana a me ka mālama ʻana, e hiki ai i ka hoʻohui pono ʻana i kāu mīkini e kū nei. Me ka mālama pono a me ka mālama manawa, e hōʻoiaʻiʻo i ka hilinaʻi lōʻihi a me ka hana maikaʻi loa.


E hoʻomaikaʻi i kāu mīkini me kā mākou Mechanical Carbide Seal Ring a ʻike i ka hoʻomaikaʻi ʻana i ka maikaʻi o ka hoʻopaʻa ʻana, hoʻolōʻihi i ke ola hana, a me ka hoʻemi ʻana i nā pono mālama. E hilinaʻi i ka lōʻihi a me ka hana ʻokoʻa o kā mākou huahana e mālama i ka pono o kāu mau mea hana, e hoʻoikaika i ka pono, a e hōʻemi i ka manawa hoʻomaha.


E hoʻokaʻaʻike mai iā mākou i kēia lā e kūkākūkā i kāu mau koi kikoʻī a e ʻae i kā mākou hui ʻike e alakaʻi iā ʻoe i ke koho ʻana i ka Mechanical Carbide Seal Ring no kāu mīkini. E hoʻokiʻekiʻe i kāu hana a me ka hilinaʻi me kā mākou mea hoʻonā kiʻekiʻe kiʻekiʻe.



No ke aha e koho ai iā mākou:

1. Hiki iā ʻoe ke loaʻa ka mea kūpono e like me kāu koi ma ka liʻiliʻi loa o ke kumu kūʻai.

2. Hāʻawi pū mākou i nā Reworks, FOB, CFR, CIF, a me nā kumukūʻai hoʻopuka puka. Manaʻo mākou iā ʻoe e hana i nā hana no ka hoʻouna ʻana e ʻoi aku ka waiwai.

3. ʻO nā mea a mākou e hāʻawi nei ua hiki ke hōʻoia ʻia, mai ka palapala hōʻike maka a hiki i ka ʻōlelo kikoʻī hope loa. (E hōʻike ʻia nā hōʻike ma ke koi)

4. e hōʻoiaʻiʻo e hāʻawi i ka pane i loko o 24hours (maʻamau i ka hola hoʻokahi)

5. Hiki iā ʻoe ke kiʻi i nā mea kūʻai ʻokoʻa, nā hāʻawi wili me ka hōʻemi ʻana i ka manawa hana.

6. Hoʻolaʻa piha mākou i kā mākou mea kūʻai. Inā ʻaʻole hiki ke hoʻokō i kāu mau koi ma hope o ka nānā ʻana i nā koho āpau, ʻaʻole mākou e alakaʻi hewa iā ʻoe ma ka hana ʻana i nā ʻōlelo hoʻohiki wahaheʻe e hoʻokumu ai i nā pilina mea kūʻai aku.

Hale Hana & Hoikeike


undefined


KĀHEA IĀ MĀ˚OU


Kelepona&Wechat&Whatsup: +8618707335571

Ninau:info@retopcarbide.com


E HOEA MAI I KA LEKA
E ʻoluʻolu e leka a e hoʻi mākou iā ʻoe!
NA HUAKAI PILI
Wet diamond polishing pads for graniteʻO ka lima lāʻau carbide sima

ʻO ka lima lāʻau carbide sima

He kuleana ko Tungsten carbide bushing i ka hoʻonoho ʻana a i ʻole ka pale ʻana i ka axle shaft e pale ai i ka ʻaʻahu o ka shaft. I ka manawa like, hiki ke hoʻohana ʻia ka paʻakikī paʻakikī o ka wili a me ke kumu me ka ʻole o ke kinai ʻana, a laila e hōʻemi ana i ka paʻakikī o ka hana ʻana o nā ʻāpana kūpono. Ke hana nei ʻo Tungsten carbide bushing a me nā lima lima i kahi ʻāina maikaʻi loa. Ma ke ʻano he cemente ʻoihana
Wet diamond polishing pads for graniteHoʻopaʻa Sila ʻAi Tungsten Carbide

Hoʻopaʻa Sila ʻAi Tungsten Carbide

ʻO ka mea maka no ke apo seal carbide he tungsten carbide me ka pauka cobalt, ma o kekahi ʻāpana i hoʻopaʻa ʻia i loko o ke apo, a hoʻokomo hope i loko o ka umu ahi a i ʻole hydrogen reduction furnace.Hoʻopuka kēia mea hoʻopaʻa i kahi metala seramika paʻakikī, ʻoi aku ka paʻa o ka ʻaʻahu, a ʻoi aku ka paʻakikī ma mua o nā mea ʻē aʻe. Hoʻohana nui ʻia ke apo seal carbide cemented i ka ʻoihana seal mechanical
Wet diamond polishing pads for graniteNa apo sila nui karbida me ka nickel binder

Na apo sila nui karbida me ka nickel binder

ʻO ka Big Carbide Seal Rings me Nickel Binder he mau mea i hana pono ʻia i hoʻolālā ʻia e hāʻawi i ka hana sealing ʻokoʻa i nā noi ʻoihana like ʻole. ʻO kēia mau apo ke anawaena o waho mai ka 320 a 600 millimeters a me ka anawaena o loko ma waena o 250 a me 450 millimeters. Me ka hoʻomanawanui paʻa o +/- 0.5mm, hāʻawi kēia mau apo sila i kahi kiʻekiʻe o ka pololei a me ka r.
Wet diamond polishing pads for graniteCarbide bushing pahu kila no ka ʻoihana pamu

Carbide bushing pahu kila no ka ʻoihana pamu

Hoʻokumu ʻia kā mākou Tungsten Carbide Bushings e kū i nā kūlana paʻakikī i loaʻa i ka ʻoihana pamu. ʻO ka nui o loko, i haku ʻia me ka tungsten carbide kiʻekiʻe, hōʻike i ka paʻakikī paʻakikī a me ke kūpaʻa ʻana. Mālama kēia i ke kūpaʻa ʻoi aku ka maikaʻi i ka abrasion, erosion, a me ka corrosion, e hoʻonui nui i ke ola o ka bushing. Hāʻawi ka pahu kila o waho i kahi ʻāpana ikaika
Wet diamond polishing pads for graniteapo mechanical sila sima no ka pauma wai

apo mechanical sila sima no ka pauma wai

Hana ʻia mai ka carbide cemented premium, hāʻawi kēia apo mechanical seal i ke kū kūʻē kūʻē ʻana i ka corrosion, e kūpono ana ia no nā noi i nā paila wai. Inā ʻoe e pili ana i nā wai hoʻomāinoino, nā kemika, a i ʻole nā ​​​​palapala abrasive, e hoʻomau kā mākou apo sila a mālama i kona kūpaʻa i ka manawa.
Wet diamond polishing pads for graniteʻO ke apo mechanical seal sima Carbide

ʻO ke apo mechanical seal sima Carbide

Hoʻopuka kēia mea hoʻopaʻa i kahi metala seramika paʻakikī, ʻoi aku ka paʻa o ka ʻaʻahu, a ʻoi aku ka paʻakikī ma mua o nā mea ʻē aʻe. Hoʻohana nui ʻia ke apo seal carbide cemented i ka ʻoihana seal mechanical, a me ka ʻoihana petrochemical ma muli o kona kūpaʻa maikaʻi loa a me ka pale ʻana i ka corrosion.
Wet diamond polishing pads for graniteʻO nā mea hoʻoheheʻe Tungsten Carbide

ʻO nā mea hoʻoheheʻe Tungsten Carbide

ʻO Tungsten Carbide Bushings nā ʻāpana i hana ʻia mai ka hui pū ʻana o ka paʻa paʻa, carbide cemented, tungsten steel, a me tungsten carbide. Kaulana ʻia kēia mau bushings no ko lākou pale ʻana i ka lole, nā waiwai anti-corrosion, a me ka ikaika compressive maikaʻi loa.
Wet diamond polishing pads for graniteʻO Tungsten Carbide Bushing i ka nui liʻiliʻi

ʻO Tungsten Carbide Bushing i ka nui liʻiliʻi

ʻO Tungsten Carbide Bushings nā ʻāpana i hana ʻia mai ka hui pū ʻana o ka paʻa paʻa, carbide cemented, tungsten steel, a me tungsten carbide. Kaulana ʻia kēia mau bushings no ko lākou pale ʻana i ka lole, nā waiwai anti-corrosion, a me ka ikaika compressive maikaʻi loa.
Wet diamond polishing pads for graniteʻO nā lima ʻo Tungsten Carbide no nā Pump Slurry

ʻO nā lima ʻo Tungsten Carbide no nā Pump Slurry

Ke hoʻolauna nei i kā mākou Tungsten Carbide Sleeves no nā Slurry Pumps - ka hopena hope loa e hoʻonui ai i ka lōʻihi a me ka hana o kāu mau ʻōnaehana pumping. Hoʻolālā ʻia me ka pololei a hana ʻia mai ka tungsten carbide kiʻekiʻe, ua hoʻolālā ʻia kēia mau lima lima e kū i nā pilikia i hoʻopuka ʻia e nā noi slurry abrasive a corrosive.
Wet diamond polishing pads for graniteʻO nā lima karbida Tungsten a i ʻole nā ​​​​Bushings

ʻO nā lima karbida Tungsten a i ʻole nā ​​​​Bushings

ʻO Tungsten Carbide Sleeves a i ʻole Bushings - ka hopena kūpono no nā ʻoihana e koi ana i ka lōʻihi a me ka hana. Hoʻolālā ʻia me ka pololei a hana ʻia mai ka tungsten carbide kiʻekiʻe, ua hoʻolālā ʻia kā mākou mau lima lima / bushings e ʻoi aku ka maikaʻi i nā noi paʻakikī kahi i mea nui ai ke kūpaʻa a me ka hilinaʻi.
Wet diamond polishing pads for graniteTungsten Carbide Bottom Sleeve

Tungsten Carbide Bottom Sleeve

Invest in durability with our Tungsten Carbide Bottom Sleeves. Engineered for precision and versatility, these sleeves redefine longevity in industrial applications. Discover cost savings and uninterrupted productivity today
Kuleana kope © Zhuzhou Retop Carbide Co., Ltd / sitemap / XML / Privacy Policy   

Home

HANA

E pili ana iā mākou

Hoʻopili