Aha ngwaahịa:Bọọlụ egwe ọka
Ọkwa: YG8, YG6, YG15
Ihe:tungsten carbide, alloy siri ike
Elu:sintered, agwụla.
Ụdị nha dị: 0.3mm-100mm
Nkọwa:
Nkwụsi ike dị elu na nkwụsi ike nke akụkụ na-eme ka bọọlụ tungsten carbide bụrụ nhọrọ kacha mma maka valvụ sppherical nkenke, ihe nlele na ihe nlele, na mita, ịgba bọọlụ, mita eruba, inear bear, skru bọọlụ na-emegharị ọzọ, liner, bearings, wdg.
A na-eji bọọlụ alloy siri ike maka ngwa chọrọ ike siri ike na iguzogide iyi na abrasion, mmetụta siri ike na ihe egwu. Ọtụtụ mgbe, tungsten carbide na-esi ike ihe dị ka okpukpu atọ karịa ígwè.
Nkọwapụta:
| Aha: | Tungsten Carbide bọọlụ |
| Aha ndị ọzọ: | bọọlụ siri ike, bọọlụ carbide cimented, bọọlụ carbide dayameta 8mm, tungsten carbide beads, tungsten carbide sphere |
| Denisty: | 14.85-15.5g/cm3 |
| Isi ike: | HRA 90.5-91.5 |
| Modul nke elasticity: | 98.000.000 |
| Njirimara: | Yiri nguzogide, isi ike dị elu, njupụta dị elu, mgbochi corrosion |
| Ngwa: | Bọọlụ na-ebu, Nledo na nha, bọọlụ igwe nri tungsten carbide. bọọlụ valvụ hydraulic ziri ezi, kposara bọọlụ, mkpịsị bọọlụ |
Ihe eji arụ ọrụ:
| Ike tensile kacha | 220 Kpsi aha |
| Ike mkpakọ kacha | 750-790 Kpsi |
| Ike mgbawa ntụgharị | 320-365 Kpsi |
| Isi ike | HRA90.5-91.5 |
| Modul nke Elasticity | 92,000-93,000 Kpsi |
| Njirimara magnetik | Igwe ndọta dị ntakịrị |
| Ọkụ bara uru kacha | 800°F |
Tebụl nnabata bọọlụ AFBMA:
| Ọkwa | Ọdịiche dayameta bọọlụ ekwe ekwe | Ngbanwe Site na Ụdị Spherical | Nkezi mgbakọ na mwepụ dị n'elu | Ntachi anya dayameta bụ isi | Ọdịiche dayameta Lot anabatara |
| 3 | 3µ” | 3µ” | .5µ” | ± 30 µ" | 5µ” |
| .000003″ | .000003″ | .0000005″ | ±.00003″ | .000005″ |
| 5 | 5µ” | 5µ” | .8 µ” | ± 50 µ" | 10 µ” |
| .000005″ | .000005″ | .0000008″ | ±.00005″ | .00001″ |
| 10 | 10 µ” | 10 µ” | 1.0 µ" | ± 100 µ” | 20µ” |
| .00001″ | .00001″ | .000001″ | ±.0001″ | .00002″ |
| 15 | 15 µ” | 15 µ” | 1.0 µ" | ± 100 µ” | 30 µ” |
| .000015″ | .000015″ | .000001″ | ±.0001″ | .00003″ |
| 16 | 16 µ” | 16 µ” | 1.0 µ" | ± 100 µ” | 32µ” |
| .000016″ | .000016″ | .000001″ | ±.0001″ | .000032″ |
| 24 | 24µ" | 24µ" | 2.0 µ” | ± 100 µ” | 48 µ” |
| .000024″ | .000024″ | .000002″ | ±.0001″ | .000048″ |
| 25 | 25µ” | 25µ” | 2.0 µ” | ± 100 µ” | 50µ” |
| .000025″ | .000025″ | .000002″ | ±.0001″ | .00005″ |
| 48 | 48 µ” | 48 µ” | 3.0 µ" | ± 200 µ” | 96 µ” |
| .000048″ | .000048″ | .000003″ | ±.0002″ | .000096″ |
| 50 | 50µ” | 50µ” | 3.0 µ" | ± 300 µ” | 100 µ” |
| .00005″ | .00005″ | .000003″ | ±.0003″ | .0001″ |
| 100 | 100 µ” | 100 µ” | 5.0 µ” | ± 500 µ” | 200 µ” |
| .0001″ | .0001″ | .000005″ | ±.0005″ | .0002″ |
| 200 | 200 µ” | 200 µ” | 8.0 µ” | ± 1000 µ” | 400 µ” |
| .0002″ | .0002″ | .000008″ | ±.001″ | .0004″ |
| 300 | 300 µ” | 300 µ” |
| ± 1000 µ” | 400 µ” |
| .0003″ | .0003″ |
| ±.001″ | .0004″ |
| 500 | 500 µ” | 500 µ” |
| ± 2000 µ” | 1000 µ” |
| .0005″ | .0005″ |
| ±.002″ | .001″ |
| 1000 | 1000 µ” | 1000 µ” |
| ± 5000 µ” | 2000 µ” |
| .001″ | .001″ |
| ±.005″ | .002″ |
 |  |
Ihe kpatara ịhọrọ anyị:
1. Ị nwere ike nweta ihe zuru oke dịka ihe ị chọrọ na ọ dịkarịa ala ọnụahịa.
2. Anyị na-enyekwa Reworks, FOB, CFR, CIF, na ọnụ ụzọ nnyefe ọnụ ụzọ. Anyị na-atụ aro ka ịme azụmahịa maka mbupu nke ga-adị oke ọnụ ahịa.
3. Ihe anyị na-enye bụ nkwenye kpamkpam, site na akwụkwọ nyocha nke akụrụngwa ruo na nkwupụta akụkụ ikpeazụ. (Akụkọ ga-egosi na achọrọ)
4. e kwere nkwa inye nzaghachi n'ime awa 24 (na-abụkarị n'otu elekere)
5. Ị nwere ike nweta ngwaahịa ọzọ, igwe ihe nnyefe na ibelata n'ichepụta oge.
6. Anyị raara onwe anyị nye ndị ahịa anyị kpamkpam. Ọ bụrụ na ọ gaghị ekwe omume imezu ihe ndị ị chọrọ mgbe ị nyochachara nhọrọ niile, anyị agaghị eduhie gị site n'ịkwe nkwa ụgha nke ga-eme ka ndị ahịa dị mma.
Ụlọ mmepụta ihe & ihe ngosi
KPỌTỤRỤ ANYỊ
Ekwentị&Wechat&Whatsup: +8618707335571
Ajụjụ:info@retopcarbide.com
