Mgbanaka akara Carbide na-eguzogide corrosion

Ezubere maka ngwa dị iche iche, mgbanaka Carbide anyị Mechanical Carbide Seal bụ akụrụngwa dị iche iche na-eme nke ọma na ụlọ ọrụ dị iche iche, gụnyere ụgbọ ala, nrụpụta, mmanụ na gas, na ndị ọzọ. Emebere ya ka ọ wepụta usoro akara a pụrụ ịdabere na ya, na-egbochi ntapu na idobe arụmọrụ kacha mma na gburugburu ebe na-achọsi ike.

Nweta ọnụahịa

NKWUO MMADỤ

Aha ngwaahịa:Mgbanaka akara Carbide na-eguzogide corrosion

Nkọwa:

Corrosion Resistant Mechanical Carbide Seal Ring - ngwọta a pụrụ ịdabere na ya na nke dị elu iji kwalite arụmọrụ na ogologo oge nke igwe gị. A na-eji ihe carbide dị elu arụzi mgbanaka akara a nke ọma, na-eme ka ọ dị ogologo ndụ na iguzogide iyi na dọka.

Emebere ya maka ngwa dị iche iche, mgbanaka Carbide Seal mgbanaka anyị bụ akụrụngwa dị iche iche na-eme nke ọma na ụlọ ọrụ dị iche iche, gụnyere ụgbọ ala, nrụpụta, mmanụ na gas, na ndị ọzọ. Emebere ya nke ọma iji nye usoro akara a pụrụ ịdabere na ya, na-egbochi ntapu na idobe arụmọrụ kachasị mma na gburugburu ebe ndị na-achọsi ike.

Chart Ọkwa maka mgbanaka igwe:

Ọkwa	Nickel Ọdịnaya Ni%	Njupụta g/cm³	Isi ike (HRA)	TRS (MPa)	Nha ọka (um)
YN6	6.0	14.82	92.0	2150	0.8
YN8	8.0	14.80	91.5	2200	0.8
YN10	10.0	14.60	90.5	2350	0.8
YN14	14.0	14.15	88.8	2300	1.0
YN20	20.0	14.10	88.5	2400	0.8

Akụkụ ndị bụ isi:

Ogologo Ogologo Kasị Eke: Emebere ya site na ihe carbide adịchaghị mma, mgbanaka akara anyị na-egosipụta ike na nkwụsi ike pụtara ìhè, na-enyere ya aka iguzogide nrụgide dị elu, oke okpomọkụ, na ọnọdụ abrasive. Ọ na-eme ka arụmọrụ na-adịte aka, na-ebelata oge nkwụsị na ibelata ụgwọ ọrụ.

Ịrụ ọrụ nkedo emelitere:Ezi nhazi na injinia nke Mechanical Carbide Seal Ring na-ekwe nkwa usoro akara dị irè. Ọ na-enye akara siri ike ma dị nchebe, na-egbochi ntapu nke mmiri, gas, ma ọ bụ ihe mmetọ, na-akwalite ịrụ ọrụ nke ọma na ịrụ ọrụ kacha mma.

Ngwa dịgasị iche iche:Mgbanaka akara anyị kwesịrị ekwesị maka ọtụtụ igwe na akụrụngwa, gụnyere nfuli, compressors, turbines, engines, na ndị ọzọ. Ngbanwe ya na ndakọrịta ya na-eme ka ọ bụrụ nhọrọ dị mma maka ngwa ụlọ ọrụ dị iche iche, na-eme ka njikọ na-enweghị ntụpọ na ọrụ kachasị mma.

Nhọrọ enwere ike ịhazi:Anyị ghọtara na ọrụ ọ bụla nwere ihe pụrụ iche chọrọ. N'ihi ya, anyị na-enye nhọrọ ahaziri maka mgbanaka Carbide Seal mgbanaka anyị, na-enye gị ohere ịhọrọ akụkụ na nkọwapụta nke dabara na mkpa gị. Ndị otu ndị ọkachamara anyị dị njikere inyere gị aka n'ịkwado mgbanaka akara iji mezuo ihe ị chọrọ.

Nwụnye na nlekọta dị mfe:Emebere mgbanaka akara anyị maka ịdị mfe nke nrụnye na nrụzi, na-eme ka ntinye dị larịị n'ime igwe dị adị. Site na nlekọta kwesịrị ekwesị na nlekọta oge, ọ na-eme ka ntụkwasị obi dị ogologo oge na ịrụ ọrụ kachasị mma.

Jiri mgbanaka Mechanical Carbide Seal mgbanaka kwalite igwe gị wee nweta ahụmịhe njide nke ọma, ndụ ogologo ọrụ yana belata ihe achọrọ nrụzi. Tụkwasa ntụkwasị obi na ịdịte aka na arụmọrụ pụrụiche nke ngwaahịa anyị iji chekwaa iguzosi ike n'ezi ihe nke akụrụngwa gị, kwalite arụmọrụ, yana belata oge ọdịda.

Kpọtụrụ anyị taa ka ị kparịta ihe ị chọrọ ma mee ka ndị otu anyị maara ihe duzie gị n'ịhọrọ mgbanaka Mechanical Carbide Seal Ring zuru oke maka igwe gị. Welite arụmọrụ gị na ntụkwasị obi gị site na iji mgbanaka mgbanaka anyị dị elu.

Ihe kpatara ịhọrọ anyị:

1. Ị nwere ike nweta ihe zuru oke dịka ihe ị chọrọ na ọ dịkarịa ala ọnụahịa.

2. Anyị na-enyekwa Reworks, FOB, CFR, CIF, na ọnụ ụzọ nnyefe ọnụ ụzọ. Anyị na-atụ aro ka ịme azụmahịa maka mbupu nke ga-adị oke ọnụ ahịa.

3. Ihe anyị na-enye bụ nkwenye kpamkpam, site na akwụkwọ nyocha nke akụrụngwa ruo na nkwupụta akụkụ ikpeazụ. (Akụkọ ga-egosi na achọrọ)

4. e kwere nkwa inye nzaghachi n'ime awa 24 (na-abụkarị n'otu elekere)

5. Ị nwere ike nweta ngwaahịa ọzọ, igwe ihe nnyefe na ibelata n'ichepụta oge.

6. Anyị raara onwe anyị nye ndị ahịa anyị kpamkpam. Ọ bụrụ na ọ gaghị ekwe omume imezu ihe ndị ị chọrọ mgbe ị nyochachara nhọrọ niile, anyị agaghị eduhie gị site n'ịkwe nkwa ụgha nke ga-eme ka ndị ahịa dị mma.

Ụlọ mmepụta ihe & ihe ngosi

undefined

KPỌTỤRỤ ANYỊ

Ekwentị&Wechat&Whatsup: +8618707335571

Ajụjụ:info@retopcarbide.com

Zitere anyị ozi

Biko zitere anyị ozi anyị ga-alaghachikwute gị!

Ngwaahịa ndị metụtara

Ogwe aka nke carbide nwere ciment

Tungsten carbide bushing na-arụ ọrụ n'ịkwado ma ọ bụ na-echebe ogwe axle iji gbochie iyi akwa. N'otu oge ahụ, ọ na-ebelata ihe siri ike chọrọ nke igwe na-egweri na ogwe aka na-enweghị quenching nwekwara ike iji ya mee ihe, si otú ahụ na-ebelata ihe isi ike nhazi nke akụkụ ndị dị mkpa. Tungsten carbide bushes na aka uwe na-arụ ọrụ na ebe dara ogbenye. Dị ka simenti ọkachamara

Tungsten Carbide akara mgbanaka

Ngwa maka mgbanaka akara carbide bụ tungsten carbide na cobalt ntụ ntụ, site na otu ebu a na-agbanye n'ime mgbanaka, n'ikpeazụ tinye ya na ọkụ ọkụ ma ọ bụ ọkụ mbelata hydrogen.Ihe nkedo a na-emepụta ihe siri ike nke ukwuu, seramiiki-metal siri ike, nke nwere ezigbo nguzogide iyi, ma dị oke karịa ihe ndị ọzọ. A na-eji mgbanaka akara carbide cimented eme ihe na ụlọ ọrụ akara igwe

Nnukwu mkpuchi mkpuchi Carbide nwere Nickel Binder

The Big Carbide Seal Rings na Nickel Binder bụ ihe eji arụ ọrụ nkenke emebere iji nye arụmọrụ akara pụrụ iche na ngwa ụlọ ọrụ dị iche iche. Mgbanaka ndị a nwere dayameta mpụta sitere na 320 ruo 600 millimeters yana dayameta dị n'ime n'etiti 250 na 450 millimeters. Site na nnabata siri ike nke ihe dịka +/- 0.5mm, mgbanaka akara ndị a na-enye ogo dị elu nke izi ezi na r.

Carbide bushing steel case maka ụlọ ọrụ mgbapụta

A na-ewu Bushings Tungsten Carbide anyị iji guzogide ọnọdụ ndị siri ike zutere na ụlọ ọrụ mgbapụta. Ogo dị n'ime, nke nwere tungsten carbide dị elu, na-egosipụta ike siri ike na iyi nguzogide. Nke a na-eme ka nguzogide dị elu na abrasion, mbuze, na corrosion, na-agbatịkwu ogologo ndụ nke osisi. Igwe nchara dị n'èzí na-enye ihe mgbakwunye ike

Mgbanaka Akara Igwe Cemented Carbide Maka Mgbapụta Mmiri

Emebere ya na carbide cemented premium, mgbanaka akara a na-arụ ọrụ na-enye nguzogide pụrụiche megide corrosion, na-eme ka ọ dị mma maka ngwa na nfuli mmiri. Ma ị na-emeso mmiri mmiri na-eme ihe ike, kemịkalụ, ma ọ bụ ihe abrasive, mgbanaka akara anyị ga-atachi obi ma nọgide na-eguzosi ike n'ezi ihe ka oge na-aga.

Mgbanaka akara akara igwe nke cemented

Ihe nkedo a na-emepụta ihe siri ike nke ukwuu, seramiiki-metal siri ike, nke nwere ezigbo nguzogide iyi, ma dị oke karịa ihe ndị ọzọ. A na-eji mgbanaka mkpuchi carbide cimented eme ihe n'ọtụtụ ebe na ụlọ ọrụ akara igwe, yana ụlọ ọrụ petrochemical n'ihi nguzogide ya dị mma na nguzogide corrosion.

Tungsten Carbide Bushings

Tungsten Carbide Bushings bụ ihe eji arụ ọrụ nkenke sitere na ngwakọta nke alloy siri ike, carbide cimented, nchara tungsten na tungsten carbide. A ma ama ohia ndị a maka nguzogide eyi pụrụiche, ihe mgbochi corrosion na ike mkpakọ dị oke mma.

Tungsten Carbide Bushing na obere nha

Uwe Tungsten Carbide maka nfuli slurry

Ewebata anyị Tungsten Carbide Sleeves for Slurry Pumps - ihe ngwọta kachasị mma iji kwalite ịdịte aka na arụmọrụ nke sistemu mgbapụta gị. N'ịbụ ndị ejiri nkenke ma rụọ ya site na tungsten carbide dị elu, a haziri aka uwe ndị a nke ọma iji nagide ihe ịma aka sitere na ngwa abrasive na nke na-emebi emebi na-eweta.

Tungsten Carbide Sleeves ma ọ bụ Bushings

Tungsten Carbide Sleeves ma ọ bụ Bushings - ngwọta zuru oke maka ụlọ ọrụ na-achọ ịdịte aka na arụmọrụ pụrụ iche. Ejiri ya nkenke ma rụọ ya site na tungsten carbide dị elu, a haziri aka anyị / ohia anyị ka ọ bụrụ nke ọma na ngwa ndị siri ike ebe nguzogide na ntụkwasị obi bụ ihe kacha mkpa.

Tungsten Carbide Bottom Sleeve

Invest in durability with our Tungsten Carbide Bottom Sleeves. Engineered for precision and versatility, these sleeves redefine longevity in industrial applications. Discover cost savings and uninterrupted productivity today