Aha ngwaahịa:Mkpanaka ịgbado ọkụ Tungsten carbide nwere ihe dị okirikiri
Ihe:elu mma siri ike alloy na ọla kọpa isi ma ọ bụ nickel isi
Isi ike:HRA89-91
Ike ọdụdọ: 690MPa
Atụmatụ:fusible, mfe ịgbado ọkụ
Nha:3-5mm, 6-8mm, etc
Nkọwa:
A na-eji mkpanaka granular alloy na ihe na-agbanwe matrix carbide, enwere mgbanwe pụrụ iche n'elu na agba iji chọpụta nha granular. Isi ihe nke urughuru size bụ tungsten carbide, nke ekweghị ekwe bụ banyere HRA89-91. Ike tensile bụ ihe dịka 690MPa
Uru:
Nguzogide iyi dị elu:Tungsten carbide bụ otu n'ime ihe ndị siri ike, yabụ ọ na-enye ezigbo mgbochi iyi, ọbụlagodi na gburugburu ebe siri ike.
Nguzogide corrosion:Tungsten carbide na-eguzogidekwa corrosion nke ukwuu ma nwee ike iguzogide ọtụtụ kemịkalụ na acid.
Ike dị elu:Ogwe ihe mejupụtara nke Tungsten carbide siri ike ma na-adịgide adịgide, na-eme ka ha dị mma maka ngwa na-achọsi ike.
Ntughari:Enwere ike iji mkpanaka tungsten carbide composite mee ihe n'ọtụtụ ngwa, gụnyere Ngwuputa, ihe owuwu, mkpọ mmanụ na gas, na nrụpụta.
N'ozuzu, mkpanaka tungsten carbide composite na-enye ọmarịcha arụmọrụ na ịdịte aka, na-eme ka ha bụrụ nhọrọ a ma ama maka ọtụtụ ngwa ụlọ ọrụ mmepụta ihe.
Nkọwapụta:
| Aha ngwaahịa: | tungsten carbide mejupụtara mkpanaka |
| Aha ndị ọzọ: | Ngwakọta alloy mkpanaka |
| tungsten carbide mejupụtara mkpanaka |
| mkpanaka ihe mejupụtara carbide cemented |
| mkpanaka ihe mejupụtara carbide |
| mkpanaka ịgbado ọkụ |
| tungsten carbide mejupụtara mkpanaka brazing |
| mkpanaka ọla kọpa carbide |
| mkpanaka ịgbado ọkụ YD |
| Nha urughuru pụrụ iche | Ma udi na nha nwere ike ahaziri |
| nha nha nke carbide | 1.6mm -3.2mm，3.2mm -4.8mm，4.8mm -6.4mm |
| 6.4mm -8.0mm，8.0mm -9.5mm |
| ogologo nke ịgbado ọkụ mkpanaka | 280mm, 450mm |
| arọ nke ịgbado ọkụ mkpanaka | ihe dị ka 500 g / pc |
| Atụmatụ | ahụ angular ma ọ bụ OEM ahụ |
| ezi permeability |
Nkọwa mbukota:
Ọkwa maka mkpanaka ihe mejupụtara tungsten carbide:
| Ọkwa | Ihe mejupụtara kemịkalụ (%) |
| Cu+Zn+Sn | WC | Co |
| Cu-30 | 30±2 | 58-70 | 5.0-5.1 |
| Cu-40 | 40±2 | 53-56 | 4.6-4.8 |
| Cu-45 | 45±2 | 48-52 | 4.2-4.5 |
| Cu-50 | 50±2 | 44-48 | 3.8-4.2 |
|
|
|
|
| Ọkwa | Ihe mejupụtara kemịkalụ (%) |
| Ni+Cu+Zn | WC | Co |
| Ni-30 | 30±2 | 57-65 | 5.1-5.8 |
| Ni-40 | 40±2 | 53-57 | 4.6-5.0 |
| Ni-45 | 45±2 | 49-52 | 4.2-4.5 |
| Ni-50 | 50±2 | 44-48 | 3.8-4.1
|
Ngwa nke YD mkpanaka ịgbado ọkụ:
Ihe kpatara ịhọrọ anyị:
1. Ị nwere ike nweta ihe zuru oke dịka ihe ị chọrọ na ọ dịkarịa ala ọnụahịa.
2. Anyị na-enyekwa Reworks, FOB, CFR, CIF, na ọnụ ụzọ nnyefe ọnụ ụzọ. Anyị na-atụ aro ka ịme azụmahịa maka mbupu nke ga-adị oke ọnụ ahịa.
3. Ihe anyị na-enye bụ nkwenye kpamkpam, site na akwụkwọ nyocha nke akụrụngwa ruo na nkwupụta akụkụ ikpeazụ. (Akụkọ ga-egosi na achọrọ)
4. e kwere nkwa inye nzaghachi n'ime awa 24 (na-abụkarị n'otu elekere)
5. Ị nwere ike nweta ngwaahịa ọzọ, igwe ihe nnyefe na ibelata n'ichepụta oge.
6. Anyị raara onwe anyị nye ndị ahịa anyị kpamkpam. Ọ bụrụ na ọ gaghị ekwe omume imezu ihe ndị ị chọrọ mgbe ị nyochachara nhọrọ niile, anyị agaghị eduhie gị site n'ịkwe nkwa ụgha nke ga-eme ka ndị ahịa dị mma.
Ụlọ mmepụta ihe & ihe ngosi
KPỌTỤRỤ ANYỊ
Ekwentị&Wechat&Whatsup: +8618707335571
Ajụjụ:info@retopcarbide.com
