POTSO
  • Li-blocks tsa carbide tse sa buloang
  • Li-blocks tsa carbide tse sa buloang
  • Li-blocks tsa carbide tse sa buloang
  • Li-blocks tsa carbide tse sa buloang

Li-blocks tsa carbide tse sa buloang

Ho na le ho qetela le likheo holim'a likarolo tsa tungsten carbide.Lihlahisoa tseo re li bonts'ang ha li na letho, tseo ntle le ho sila. Hangata, likotoana tse sa tsitsang li tla ba lehlabathe le phatlohileng, le tla hloeka haholoanyane kapa le be betere bakeng sa welding.
  • Kereiti: YG8 kapa joalo ka tlhoko ea hau
  • Litekanyo: Metric kapa Imperial
  • boima: HRA89-90
  • Boima: 14.8/mm3
  • TŠEBETSO TSA MORERO

Lebitso la Sehlahiswa:Li-blocks tsa carbide tse sa buloang

Kereiti:YG8 kapa joalo ka tlhoko ea hau

Bokaholimo:e koaletsoeng, ka ho phatloha lehlabathe

Boholo:Metric kapa Imperial

Ho thatafala: HRA89-90

Boima: 14.8/mm3


Tlhaloso:

Ho na le ho qetela le likheo holim'a likarolo tsa tungsten carbide.

Lihlahisoa tseo re li bonts'ang ha li na letho, tseo ntle le ho sila. Hangata,  likotoana tse sa buloang li tla phatloha lehlabathe, e leng se tla hloeka haholoanyane kapa se be betere bakeng sa ho cheselletsa.

Unground carbide blocksUnground carbide blocks



Ke Hobane'ng ha U Re Khetha:

1. U ka fumana boitsebiso bo phethahetseng ho ea ka tlhokahalo ea hau bonyane theko e ka khonehang.

2. Re boetse re fana ka Reworks, FOB, CFR, CIF, le litheko tsa ho fana ka ntlo le ntlo. Re fana ka tlhahiso ea hore u etse tumellano ea ho tsamaisa thepa e tla u baballa haholo.

3. Thepa eo re fanang ka eona e ka netefatsoa ka botlalo, ho tloha ho setifikeiti sa tlhahlobo ea thepa e tala ho isa polelong ea ho qetela.(Litlaleho li tla hlaha ho latela tlhoko)

4. e tiisetso ea ho fana ka karabo nakong ea lihora tse 24(hangata ka hora e tšoanang)

5. U ka fumana mefuta e meng ea li-stock, ho tsamaisoa ha leloala ka ho fokotsa nako ea tlhahiso.

6. Re inehetse ka ho feletseng ho bareki ba rona. Haeba ho ke ke ha khoneha ho finyella litlhoko tsa hau ka mor'a ho hlahloba likhetho tsohle, re ke ke ra u khelosa ka ho etsa litšepiso tsa bohata tse tla theha likamano tse ntle tsa bareki.

Lifeme le Lipontšo


undefined


ITEANYE LE RONA


Phone&Wechat&Whatsup: +8618707335571

Patlisiso:info@retopcarbide.com


RE THUSOE MOSE
Ka kopo, romella molaetsa 'me re tla khutlela ho uena!
LIHLAHISO TSE HLAHANG
Wet diamond polishing pads for graniteTungsten carbide hlobo

Tungsten carbide hlobo

Mofuta oa rona oa tungsten carbide o entsoe ka tungsten carbide core ka har'a khetla ea tšepe, e fanang ka ho nepahala ho phahameng. Hore na o hloka meralo e tloaelehileng kapa e hlophisitsoeng, hlobo e entsoe ho fihlela kopo ea hau e ikhethileng, e netefatsa boleng le ts'ebetso e tšoarellang nako e telele.
Wet diamond polishing pads for graniteTungsten carbide lebili la tataiso

Tungsten carbide lebili la tataiso

Tungsten Carbide Guide Wheel, e entsoeng ka thepa ea boleng bo holimo, mabili ana a hlalosa ts'ebetso le ho ts'epahala maemong ohle.
Wet diamond polishing pads for graniteHardness HRA94 Carbide apara likarolo

Hardness HRA94 Carbide apara likarolo

Lihlahisoa tsa mofuta ona li hloka tekheniki e phahameng nakong ea tlhahiso, e le ho laola boholo, arc le nako lipakeng tsa meno ka 'ngoe. Ka nako e ts'oanang, boima bo phahame haholo ho feta lintho tse tloaelehileng.
Wet diamond polishing pads for graniteLikarolo tse sa tloaelehang tsa tungsten carbide

Likarolo tse sa tloaelehang tsa tungsten carbide

Re sebetsa ka thata ho hlahisa likaroloana tsa tungsten carbide tse etselitsoeng litlhoko tsa hau hantle, ho latela litšoantšo tsa hau. Carbide ea rona e seng e tloaelehileng e etselitsoe ho fihlela litlhoko tsa hau tse ikhethang. Ebang ke libopeho tse tloaelehileng, boholo kapa meralo e thata, sehlopha sa rona se ikemiselitse ho u tlisetsa likarolo tsa boleng bo holimo tsa carbide.
Copyright © Zhuzhou Retop Carbide Co., Ltd / sitemap / XML / Privacy Policy   

Lehae

LIHLAHISO

Mabapi le rona

Ikopanye