IBEERE
  • Awọn apa aso Tungsten Carbide fun Awọn ifasoke Slurry
  • Awọn apa aso Tungsten Carbide fun Awọn ifasoke Slurry
  • Awọn apa aso Tungsten Carbide fun Awọn ifasoke Slurry

Awọn apa aso Tungsten Carbide fun Awọn ifasoke Slurry

Iṣafihan Awọn apa aso Tungsten Carbide wa fun Awọn ifasoke Slurry - ojutu ti o ga julọ lati jẹki agbara ati iṣẹ ṣiṣe ti awọn eto fifa rẹ. Ti a ṣe pẹlu konge ati ti iṣelọpọ lati tungsten carbide ti o ni agbara giga, awọn apa aso wọnyi jẹ apẹrẹ pataki lati koju awọn italaya ti o waye nipasẹ awọn ohun elo slurry abrasive ati ibajẹ.
  • Apejuwe Ise agbese

Orukọ ọja:Awọn apa aso Tungsten Carbide fun Awọn ifasoke Slurry


Apejuwe:

Iṣafihan Awọn apa aso Tungsten Carbide wa fun Awọn ifasoke Slurry - ojutu ti o ga julọ lati jẹki agbara ati iṣẹ ṣiṣe ti awọn eto fifa rẹ. Ti a ṣe pẹlu konge ati ti iṣelọpọ lati tungsten carbide ti o ni agbara giga, awọn apa aso wọnyi jẹ apẹrẹ pataki lati koju awọn italaya ti o waye nipasẹ awọn ohun elo slurry abrasive ati ibajẹ.


undefinedundefinedundefined


Awọn ẹya pataki:

Resistance Wear ti o ga julọ: Awọn apa aso Tungsten Carbide wa jẹ olokiki fun lile lile wọn ati wọ awọn ohun-ini resistance. Wọn doko ni imunadoko awọn ipa ipanilara ti slurry, ni idaniloju igbesi aye iṣẹ gigun ati idinku idinku ati awọn idiyele itọju.


Idaabobo Ibaje:Awọn ifasoke slurry nigbagbogbo n ṣiṣẹ ni awọn agbegbe ibajẹ ti o ga, ti o jẹ ki resistance ipata jẹ ifosiwewe pataki. Awọn apa aso wa ni a ṣe atunṣe lati koju awọn ikọlu kemikali ati pese resistance ti o dara julọ lodi si ọpọlọpọ awọn fifa omi bibajẹ, ni idaniloju igbẹkẹle igba pipẹ ati iṣẹ to dara julọ.


Imudara Iṣe Idaduro:Apẹrẹ deede ati iṣelọpọ ti Tungsten Carbide Sleeves ṣe idaniloju idii ti o muna ati igbẹkẹle, idilọwọ jijo slurry ati igbega iṣẹ ṣiṣe daradara. Ẹya yii ṣe iranlọwọ lati ṣetọju iṣẹ ṣiṣe to dara julọ ati dinku eewu ti ibajẹ ati ibajẹ si ohun elo agbegbe.


Awọn aṣayan Adani:A loye pe awọn ohun elo fifa slurry oriṣiriṣi ni awọn ibeere alailẹgbẹ. Ti o ni idi ti a nṣe awọn aṣayan adani fun Tungsten Carbide Sleeves wa, pẹlu awọn titobi pupọ ati awọn iwọn. Ẹgbẹ wa ti awọn amoye ti ṣetan lati ṣe iranlọwọ fun ọ ni yiyan apa aso pipe ti o baamu iṣeto fifa soke pato ati awọn iwulo iṣẹ.


Fifi sori Rọrun ati Itọju:Awọn apa aso wa jẹ apẹrẹ fun fifi sori ẹrọ rọrun, gbigba fun isọpọ ailopin sinu awọn ọna ẹrọ fifa slurry ti o wa tẹlẹ. Ni afikun, wọn nilo itọju to kere, ti o fun ọ laaye lati dojukọ awọn iṣẹ ṣiṣe rẹ pẹlu igboiya.


Ṣe igbesoke awọn ifasoke slurry rẹ pẹlu Tungsten Carbide Sleeves ati iriri imudara yiya resistance, igbesi aye iṣẹ gigun, ati imudara ilọsiwaju. Ka lori agbara ọja wa ati iṣẹ ailẹgbẹ lati mu awọn iṣẹ fifa rẹ pọ si, dinku akoko isinmi, ati dinku awọn idiyele itọju gbogbogbo.


Kan si wa loni lati jiroro awọn ibeere rẹ pato ati jẹ ki ẹgbẹ oye wa ṣe itọsọna fun ọ ni yiyan Tungsten Carbide Sleeves pipe fun ohun elo fifa slurry rẹ. Mu iṣẹ rẹ pọ si ati igbẹkẹle rẹ pẹlu awọn apa ọwọ didara wa, ti a ṣe lati koju awọn agbegbe slurry ti o lagbara julọ.



Kí nìdí Yan Wa:

1. O le gba ohun elo pipe gẹgẹbi ibeere rẹ ni iye owo ti o kere julọ.

2. A tun nfun Awọn atunṣe, FOB, CFR, CIF, ati ẹnu-ọna si awọn owo ifijiṣẹ ẹnu-ọna. A daba pe ki o ṣe adehun fun gbigbe eyiti yoo jẹ ọrọ-aje pupọ.

3. Awọn ohun elo ti a pese jẹ iṣeduro patapata, lati ọtun lati ijẹrisi idanwo ohun elo aise si alaye iwọn ipari. (Awọn ijabọ yoo ṣafihan lori ibeere)

4. e iṣeduro lati fun esi laarin awọn wakati 24 (nigbagbogbo ni wakati kanna)

5. O le gba awọn yiyan ọja iṣura, awọn ifijiṣẹ ọlọ pẹlu idinku akoko iṣelọpọ.

6. A ti wa ni kikun igbẹhin si awọn onibara wa. Ti ko ba ṣee ṣe lati pade awọn ibeere rẹ lẹhin idanwo gbogbo awọn aṣayan, a kii yoo tan ọ jẹ nipa ṣiṣe awọn ileri eke eyiti yoo ṣẹda awọn ibatan alabara to dara.

Awọn ile-iṣẹ & Awọn ifihan


undefined


PE WA


Foonu&Wechat&Whatsup: +8618707335571

Ìbéèrè:info@retopcarbide.com


FI mail ranṣẹ si wa
Jọwọ firanṣẹ ati pe a yoo pada si ọdọ rẹ!
Awọn ọja ti o jọmọ
Wet diamond polishing pads for graniteSimenti carbide ọpa apa aso

Simenti carbide ọpa apa aso

Tungsten carbide bushing ṣe ipa kan ni ipo tabi idabobo ọpa axle lati ṣe idiwọ yiya ọpa. Ni akoko kanna, o dinku ibeere lile ti ọpa lilọ ati ọpa laisi quenching tun le ṣee lo, nitorinaa idinku iṣoro sisẹ ti awọn ẹya ti o yẹ. Tungsten carbide bushing ati awọn apa aso n ṣiṣẹ ni agbegbe ti ko dara pupọ. Bi ohun ọjọgbọn cemente
Wet diamond polishing pads for graniteTungsten Carbide Igbẹhin Oruka

Tungsten Carbide Igbẹhin Oruka

Ohun elo aise fun oruka asiwaju carbide jẹ tungsten carbide pẹlu koluboti lulú, nipasẹ apẹrẹ kan ti a tẹ sinu oruka kan, ati nikẹhin fi sinu ileru igbale tabi ileru idinku hydrogen.Asopọmọra yii ṣe agbejade alakikanju pupọ, seramiki-irin ti o le, eyiti o ni idiwọ yiya ti o dara, ati pe o jẹ ipon diẹ sii ju awọn ohun elo miiran lọ. Cemented carbide asiwaju oruka ti wa ni o gbajumo ni lilo ninu darí asiwaju ile ise
Wet diamond polishing pads for graniteAwọn oruka Ididi Carbide nla pẹlu Nickel Binder

Awọn oruka Ididi Carbide nla pẹlu Nickel Binder

Awọn Iwọn Igbẹhin Nla Carbide pẹlu Nickel Binder jẹ awọn ohun elo ti a ṣe deede ti a ṣe apẹrẹ lati pese iṣẹ lilẹ iyasọtọ ni ọpọlọpọ awọn ohun elo ile-iṣẹ. Awọn oruka wọnyi ni iwọn ila opin ti ita ti o wa lati 320 si 600 millimeters ati iwọn ila opin inu laarin 250 ati 450 millimeters. Pẹlu ifarada wiwọ ti isunmọ +/- 0.5mm, awọn oruka edidi wọnyi nfunni ni iwọn giga ti deede ati r
Wet diamond polishing pads for graniteCarbide bushing irin nla fun fifa ile ise

Carbide bushing irin nla fun fifa ile ise

Tungsten Carbide Bushings wa ni itumọ ti lati koju awọn ipo ti o nira julọ ti o pade ni ile-iṣẹ fifa. Iwọn inu, ti o jẹ ti tungsten carbide ti o ni agbara giga, ṣe afihan líle iyalẹnu ati yiya resistance. Eyi ṣe idaniloju atako ti o ga julọ si abrasion, ogbara, ati ipata, ni pataki gigun igbesi aye igbo. Apo irin lode n pese ipele ti okun ti a fi kun
Wet diamond polishing pads for graniteCemented Carbide Mechanical Seal Oruka fun Omi fifa

Cemented Carbide Mechanical Seal Oruka fun Omi fifa

Ti a ṣe lati inu carbide cemented Ere, oruka edidi ẹrọ ẹrọ yii nfunni ni ilodi si ilodisi ipata, ti o jẹ ki o jẹ apẹrẹ fun awọn ohun elo ni awọn ifasoke omi. Boya o n ba awọn ṣiṣan ibinu, awọn kemikali, tabi awọn patikulu abrasive, oruka edidi wa yoo farada ati ṣetọju iduroṣinṣin rẹ ni akoko pupọ.
Wet diamond polishing pads for graniteCemented Carbide darí asiwaju oruka

Cemented Carbide darí asiwaju oruka

Asopọmọra yii ṣe agbejade alakikanju pupọ, seramiki-irin ti o le, eyiti o ni aabo yiya ti o dara, ati pe o jẹ ipon diẹ sii ju awọn ohun elo miiran lọ. Iwọn edidi carbide ti simenti jẹ lilo pupọ ni ile-iṣẹ asiwaju ẹrọ, ati ile-iṣẹ petrokemika nitori idiwọ yiya ti o dara julọ ati resistance ipata.
Wet diamond polishing pads for graniteIpata Resistant Mechanical Carbide Igbẹhin Oruka

Ipata Resistant Mechanical Carbide Igbẹhin Oruka

Ti a ṣe apẹrẹ fun ọpọlọpọ awọn ohun elo, Mechanical Carbide Seal Oruka jẹ paati ti o wapọ ti o tayọ ni awọn ile-iṣẹ lọpọlọpọ, pẹlu adaṣe, iṣelọpọ, epo ati gaasi, ati diẹ sii. O jẹ iṣẹ-ṣiṣe pataki lati pese ẹrọ lilẹ ti o gbẹkẹle, idilọwọ jijo ati mimu iṣẹ ṣiṣe to dara julọ ni awọn agbegbe ti o nbeere.
Wet diamond polishing pads for graniteTungsten Carbide Bushings

Tungsten Carbide Bushings

Tungsten Carbide Bushings jẹ awọn ohun elo ti a ṣe deede ti a ṣe lati apapo alloy lile, carbide cemented, irin tungsten, ati tungsten carbide. Awọn bushings wọnyi jẹ olokiki fun atako yiya iyasọtọ wọn, awọn ohun-ini ipata, ati agbara ikọlu to dara julọ.
Wet diamond polishing pads for graniteTungsten Carbide Bushing ni iwọn kekere

Tungsten Carbide Bushing ni iwọn kekere

Tungsten Carbide Bushings jẹ awọn ohun elo ti a ṣe deede ti a ṣe lati apapo alloy lile, carbide cemented, irin tungsten, ati tungsten carbide. Awọn bushings wọnyi jẹ olokiki fun atako yiya iyasọtọ wọn, awọn ohun-ini ipata, ati agbara ikọlu to dara julọ.
Wet diamond polishing pads for graniteTungsten Carbide Sleeves tabi Bushings

Tungsten Carbide Sleeves tabi Bushings

Tungsten Carbide Sleeves tabi Bushings - ojutu pipe fun awọn ile-iṣẹ ti o beere agbara ati iṣẹ ṣiṣe. Ti a ṣe atunṣe pẹlu titọ ati ti a ṣe lati inu tungsten carbide ti o ga julọ, awọn apa aso / bushings wa ti a ṣe lati ṣe aṣeyọri ninu awọn ohun elo ti o nija nibiti wiwọ resistance ati igbẹkẹle jẹ pataki julọ.
Wet diamond polishing pads for graniteTungsten Carbide Bottom Sleeve

Tungsten Carbide Bottom Sleeve

Invest in durability with our Tungsten Carbide Bottom Sleeves. Engineered for precision and versatility, these sleeves redefine longevity in industrial applications. Discover cost savings and uninterrupted productivity today
Aṣẹ-lori-ara © Zhuzhou Retop Carbide Co., Ltd / sitemap / XML / Privacy Policy   

Ile

Awọn ọja

Nipa re

Olubasọrọ