IBEERE
  • Tungsten carbide elekiturodu ati gradule
  • Tungsten carbide elekiturodu ati gradule
  • Tungsten carbide elekiturodu ati gradule
  • Tungsten carbide elekiturodu ati gradule
  • Tungsten carbide elekiturodu ati gradule

Tungsten carbide elekiturodu ati gradule

Ọpa alloy apapo jẹ ti alloy granular ati rirọ matrix carbide, ṣiṣan pataki kan wa lori dada ati awọ lati le ṣe idanimọ iwọn granular. Ohun elo akọkọ ti iwọn patiku jẹ tungsten carbide, eyiti lile jẹ nipa HRA89-91. Agbara fifẹ jẹ nipa 690MPa
  • Ohun elo: alloy lile didara giga pẹlu ipilẹ bàbà tabi ipilẹ nickel
  • Lile: HRA89-91
  • Agbara fifẹ: 690MPa
  • Awọn ẹya ara ẹrọ: fusible, rọrun fun alurinmorin
  • Apejuwe Ise agbese

Orukọ ọja:Ọpa alurinmorin carbide Tungsten pẹlu awọn patikulu yika

Ohun elo:alloy lile ti o ga julọ pẹlu ipilẹ bàbà tabi ipilẹ nickel

Lile:HRA89-91

Agbara fifẹ: 690MPa

Awọn ẹya:fusible, rọrun fun alurinmorin

Iwọn:3-5mm, 6-8mm, etc 


Apejuwe:

Ọpa alloy apapo jẹ ti alloy granular ati rirọ matrix carbide, ṣiṣan pataki kan wa lori dada ati awọ lati le ṣe idanimọ iwọn granular. Ohun elo akọkọ ti iwọn patiku jẹ tungsten carbide, eyiti lile jẹ nipa HRA89-91. Agbara fifẹ jẹ nipa 690MPa

undefined


Awọn anfani:


Atako aṣọ giga:Tungsten carbide jẹ ọkan ninu awọn ohun elo ti o nira julọ, nitorinaa o pese atako yiya ti o dara julọ, paapaa ni awọn agbegbe lile.


Atako ipata:Tungsten carbide tun jẹ sooro pupọ si ipata ati pe o le koju ifihan si ọpọlọpọ awọn kemikali ati acids.


Agbara giga:Tungsten carbide composite rodu lagbara pupọ ati ti o tọ, ṣiṣe wọn jẹ apẹrẹ fun awọn ohun elo ibeere.


Ilọpo:Tungsten carbide composite rodu le ṣee lo ni ọpọlọpọ awọn ohun elo, pẹlu iwakusa, ikole, epo ati liluho gaasi, ati iṣelọpọ.


Iwoye, tungsten carbide composite rodu pese iṣẹ ṣiṣe to dara julọ ati agbara, ṣiṣe wọn ni yiyan olokiki fun ọpọlọpọ awọn ohun elo ile-iṣẹ.


Awọn pato:


Orukọ ọja:tungsten carbide ọpá apapo
Awọn orukọ miiran:apapo alloy opa
tungsten carbide ọpá apapo
cemented carbide apapo ọpá
ọpá eroja carbide
alurinmorin ọpá
tungsten carbide apapo brazing ọpá
carbide Ejò alurinmorin ọpá
YD ọpá alurinmorin
Pataki patiku iwọnMejeeji apẹrẹ ati iwọn le jẹ adani
carbide patiku iwọn1.6mm -3.2mm,3.2mm -4.8mm,4.8mm -6.4mm
6.4mm -8.0mm,8.0mm -9.5mm
ipari ti alurinmorin ọpá280mm, 450mm
àdánù ti alurinmorin ọpánipa 500g/pc
Awọn ẹya ara ẹrọawọn patikulu angula tabi awọn patikulu OEM

ti o dara permeability


Awọn alaye iṣakojọpọ:


undefinedundefinedundefinedundefined


Ite fun tungsten carbide composite opa:


IpeleAwọn akoonu akojọpọ kemikali (%)
Cu+Zn+SnWCCo
Cu-3030±258-705.0-5.1
Cu-4040±253-564.6-4.8
Cu-4545±248-524.2-4.5
Cu-5050±244-483.8-4.2




IpeleAwọn akoonu akojọpọ kemikali (%)
Ni+Cu+ZnWCCo
Ni-3030±257-655.1-5.8
Ni-4040±253-574.6-5.0
Ni-4545±249-524.2-4.5
Ni-5050±244-483.8-4.1


Awọn ohun elo ti awọn ọpa alurinmorin YD:


undefinedundefinedundefined



Kí nìdí Yan Wa:

1. O le gba ohun elo pipe gẹgẹbi ibeere rẹ ni iye owo ti o kere julọ.

2. A tun nfun Awọn atunṣe, FOB, CFR, CIF, ati ẹnu-ọna si awọn owo ifijiṣẹ ẹnu-ọna. A daba pe ki o ṣe adehun fun gbigbe eyiti yoo jẹ ọrọ-aje pupọ.

3. Awọn ohun elo ti a pese jẹ iṣeduro patapata, lati ọtun lati ijẹrisi idanwo ohun elo aise si alaye iwọn ipari. (Awọn ijabọ yoo ṣafihan lori ibeere)

4. e iṣeduro lati fun esi laarin awọn wakati 24 (nigbagbogbo ni wakati kanna)

5. O le gba awọn yiyan ọja iṣura, awọn ifijiṣẹ ọlọ pẹlu idinku akoko iṣelọpọ.

6. A ti wa ni kikun igbẹhin si awọn onibara wa. Ti ko ba ṣee ṣe lati pade awọn ibeere rẹ lẹhin idanwo gbogbo awọn aṣayan, a kii yoo tan ọ jẹ nipa ṣiṣe awọn ileri eke eyiti yoo ṣẹda awọn ibatan alabara to dara.

Awọn ile-iṣẹ & Awọn ifihan


undefined


PE WA


Foonu&Wechat&Whatsup: +8618707335571

Ìbéèrè:info@retopcarbide.com


FI mail ranṣẹ si wa
Jọwọ firanṣẹ ati pe a yoo pada si ọdọ rẹ!
Awọn ọja ti o jọmọ
Wet diamond polishing pads for graniteTungsten Carbide Apapo Rod

Tungsten Carbide Apapo Rod

Ọpa alloy apapo jẹ ti alloy granular ati rirọ matrix carbide, ṣiṣan pataki kan wa lori dada ati awọ lati le ṣe idanimọ iwọn granular. Ohun elo akọkọ ti iwọn patiku jẹ tungsten carbide, eyiti lile jẹ nipa HRA89-91. Agbara fifẹ jẹ nipa 690MPaAwọn dayato si lilọ iṣẹ ati yiya resistance ti carbide ni awọn anfani ti alurinmorin ọpá. Wi ni
Wet diamond polishing pads for graniteỌpa alurinmorin Carbide pẹlu awọn patikulu yika

Ọpa alurinmorin Carbide pẹlu awọn patikulu yika

Ọpa alloy apapo jẹ ti alloy granular ati rirọ matrix carbide, ṣiṣan pataki kan wa lori dada ati awọ lati le ṣe idanimọ iwọn granular. Ohun elo akọkọ ti iwọn patiku jẹ tungsten carbide, eyiti lile jẹ nipa HRA89-91. Agbara fifẹ jẹ nipa 690MPa
Aṣẹ-lori-ara © Zhuzhou Retop Carbide Co., Ltd / sitemap / XML / Privacy Policy   

Ile

Awọn ọja

Nipa re

Olubasọrọ