Igama Lomkhiqizo:Induku yokushisela ye-tungsten carbide enezinhlayiya eziyindilinga
Okubalulekile:i-alloy eqinile yekhwalithi ephezulu enesisekelo sethusi noma isisekelo se-nickel
Ukuqina:HRA89-91
Amandla okuqina: 690MPa
Izici:fusible, kulula ukushisela
Usayizi:3-5mm, 6-8mm, etc
Incazelo:
I-composite alloy rod yenziwe nge-granular alloy kanye ne-elastic matrix carbide, kukhona ukugeleza okukhethekile ebusweni futhi kunemibala ukuze kubonakale usayizi we-granular. Impahla eyinhloko yosayizi wezinhlayiyana i-tungsten carbide, ubulukhuni obumayelana ne-HRA89-91. Amandla okuqina acishe abe ngu-690MPa
Izinzuzo:
I-High Wear Resistance:I-Tungsten carbide ingenye yezinto ezinzima kakhulu, ngakho-ke inikeza ukumelana okuhle kakhulu kokugqoka, ngisho nasezimweni ezinzima.
Ukumelana Nokugqwala:I-Tungsten carbide nayo imelana kakhulu nokugqwala futhi ingamelana nokuchayeka kumakhemikhali nama-asidi amaningi.
Amandla Aphezulu:Izinduku ze-tungsten carbide composite ziqine ngokwedlulele futhi zihlala isikhathi eside, zizenza zilungele izinhlelo zokusebenza ezifunayo.
Ukuhlukahluka:I-tungsten carbide composite rods ingasetshenziswa ezinhlobonhlobo zezicelo, ezihlanganisa izimayini, ukwakhiwa, ukumba uwoyela negesi, kanye nokukhiqiza.
Sekukonke, izinduku ze-tungsten carbide composite zinikeza ukusebenza okuhle kakhulu nokuqina, okuzenza zibe yisinqumo esithandwayo ezinhlelweni eziningi zezimboni.
Imininingwane:
| Igama lomkhiqizo: | induku ehlanganisiwe ye-tungsten carbide |
| Amanye amagama: | induku ye-alloy ehlanganisiwe |
| induku ehlanganisiwe ye-tungsten carbide |
| induku eyinhlanganisela ye-carbide enosimende |
| induku eyinhlanganisela ye-carbide |
| izinduku zokushisela |
| i-tungsten carbide eyinhlanganisela ye-brazing rod |
| induku ye-welding yethusi ye-carbide |
| Izinduku zokushisela ze-YD |
| Usayizi wezinhlayiyana okhethekile | Kokubili umumo nosayizi kungenziwa ngokwezifiso |
| usayizi wezinhlayiyana ze-carbide | 1.6mm -3.2mm，3.2mm -4.8mm，4.8mm -6.4mm |
| 6.4mm -8.0mm，8.0mm -9.5mm |
| ubude benduku yokushisela | 280mm, 450mm |
| isisindo senduku yokushisela | cishe 500g/pc |
| Izici | izinhlayiya ze-angular noma izinhlayiya ze-OEM |
| permeability kahle |
Imininingwane yokupakisha:
Ibanga le-tungsten carbide composite rod:
| Ibanga | Okuqukethwe kwamakhemikhali (%) |
| Cu+Zn+Sn | WC | Co |
| Cu-30 | 30±2 | 58-70 | 5.0-5.1 |
| Cu-40 | 40±2 | 53-56 | 4.6-4.8 |
| Cu-45 | 45±2 | 48-52 | 4.2-4.5 |
| Cu-50 | 50±2 | 44-48 | 3.8-4.2 |
|
|
|
|
| Ibanga | Okuqukethwe kwamakhemikhali (%) |
| Ni+Cu+Zn | WC | Co |
| Ni-30 | 30±2 | 57-65 | 5.1-5.8 |
| Ni-40 | 40±2 | 53-57 | 4.6-5.0 |
| Ni-45 | 45±2 | 49-52 | 4.2-4.5 |
| Ni-50 | 50±2 | 44-48 | 3.8-4.1
|
Izicelo zezinduku zokushisela ze-YD:
Kungani Usikhethe:
1. Ungathola impahla ephelele ngokuvumelana nemfuneko yakho okungenani inani elingenzeka.
2. Siphinde sinikeze ama-Reworks, i-FOB, i-CFR, i-CIF, nezintengo zokudiliva umnyango nomnyango. Siphakamisa ukuthi wenze isivumelwano sokuthunyelwa okuzokonga kakhulu.
3. Izinto esizihlinzekayo zingaqinisekiswa ngokuphelele, kusukela kusitifiketi sokuhlolwa kwempahla engavuthiwe kuya esitatimendeni sobukhulu bokugcina.(Imibiko izovela ngokwemfuneko)
4. isiqinisekiso sokunikeza impendulo phakathi namahora angu-24(imvamisa ngehora elifanayo)
5. Ungathola ezinye izindlela zesitoko, ukulethwa komshini ngokunciphisa isikhathi sokukhiqiza.
6. Sizinikele ngokugcwele kumakhasimende ethu. Uma kungeke kwenzeke ukuhlangabezana nezidingo zakho ngemva kokuhlola zonke izinketho, ngeke sikudukise ngokwenza izithembiso ezingamanga ezizodala ubudlelwano obuhle namakhasimende.
Izimboni kanye nemibukiso
XHUMANA NATHI
Ucingo&Wechat&Whatsup: +8618707335571
Umbuzo:info@retopcarbide.com
