POTSO
  • Mokotla o entsoeng ka samente oa carbide shaft
  • Mokotla o entsoeng ka samente oa carbide shaft
  • Mokotla o entsoeng ka samente oa carbide shaft
  • Mokotla o entsoeng ka samente oa carbide shaft
  • Mokotla o entsoeng ka samente oa carbide shaft

Mokotla o entsoeng ka samente oa carbide shaft

Tungsten carbide bushing e bapala karolo ea ho beha kapa ho sireletsa shaft ea axle ho thibela ho roala ha shaft. Ka nako e ts'oanang, e theola tlhoko ea boima ba mochini oa ho sila le shaft ntle le ho tima le eona e ka sebelisoa, ka hona ho fokotsa bothata ba ho sebetsana le likarolo tse amehang. Tungsten carbide bushing le matsoho a sebetsa sebakeng se futsanehileng haholo. E le setsebi sa samente
  • Lintho tse bonahalang: alloy e thata, carbide e entsoeng ka samente, tšepe ea tungsten, tungsten carbide
  • Likarolo: ho se mamelle, anti-corrosion, thepa e ntle ea khatello
  • Boima: 14.5-14.8 g/cm3
  • boima: HRA91-91.5
  • TŠEBETSO TSA MORERO

Lebitso la Sehlahisoa:sehlahla sa tungsten carbide

Boitsebiso:motsoako o thata, carbide e entsoeng ka samente, tšepe ea tungsten, tungsten carbide

Likaroloana:apara ho hanyetsa, anti-corrosion, thepa e ntle ea compressive

Tekano:14.5-14.8 g/cm3

Ho thatafala: HRA91-91.5


Tlhaloso:

Tungsten carbide bushing e bapala karolo ea ho beha kapa ho sireletsa shaft ea axle ho thibela ho roala ha shaft. Ka nako e ts'oanang, e theola tlhoko ea boima ba mochini oa ho sila le shaft ntle le ho tima le eona e ka sebelisoa, ka hona ho fokotsa bothata ba ho sebetsana le likarolo tse amehang. Tungsten carbide bushing le matsoho a sebetsa sebakeng se futsanehileng haholo. Joaloka moetsi oa carbide ea nang le setsebi se entsoeng ka samente, re ikemiselitse ho hlahisa lihlahla tse loketseng ka ho fetisisa bakeng sa bareki ba rona, ka thepa e ntle e tala, e ntle ea ho apara ho hanyetsa, ho laola ka thata boleng, re na le botumo bo phahameng indastering ea oli le khase.


Melemo:

Sleeve sa Tungsten carbide se bapala karolo ea ho beha kapa ho sireletsa shaft ea axle ho thibela ho roala ha shaft. Ka nako e ts'oanang, e theola tlhoko ea boima ba mochini oa ho sila le shaft ntle le ho tima le eona e ka sebelisoa, ka hona ho fokotsa bothata ba ho sebetsana le likarolo tse amehang. Ka lebaka la thepa ea eona e phahameng joalo ka ho hanyetsa ho roala le ho hanyetsa kutu, lihlahla tsa tungsten carbide li sebelisoa haholo indastering ea petrochemical.


1.100% thepa e tala

2.HIP sintering, compactness e ntle

3.Tlhahlobo e tiileng ea boleng ba lihlahisoa

4.Khanyetso e phahameng ea ho apara, khanyetso e phahameng ea kutu

5.Lintho tse ntle tsa compressive.

6.Lisebelisoa tse tsoetseng pele tsa tlhahiso le liteko


Litlhaloso:


Lebitso:Mokotla oa tungsten carbide
mabitso a mang:Mokotla o entsoeng ka samente oa carbide, sleeve ea cylinder carbide, Carbide bearing, tungsten carbide components, tungsten carbide water pump shaft bearing,
Moetso:WC 93.7%, Nickle binder e ka bang 6%, tse ling tse ka bang 0.3%
Likaroloana:Ts'ebetso e ntle haholo, thepa e seng ea makenete  e ka finyelloa.
Kopo:Li-sleeve tsa Tungsten carbide hangata li sebelisoa pompong ea oli, pompo ea metsi, li-motor tsa seretse, lipompo tsa mosebetsi o boima le li-compressor tsa lipompo tsa slurry.

Linepe:


undefinedundefinedundefined



Ke Hobane'ng ha U Re Khetha:

1. U ka fumana boitsebiso bo phethahetseng ho ea ka tlhokahalo ea hau bonyane theko e ka khonehang.

2. Re boetse re fana ka Reworks, FOB, CFR, CIF, le litheko tsa ho fana ka ntlo le ntlo. Re fana ka tlhahiso ea hore u etse tumellano ea ho tsamaisa thepa e tla u baballa haholo.

3. Thepa eo re fanang ka eona e ka netefatsoa ka botlalo, ho tloha ho setifikeiti sa tlhahlobo ea thepa e tala ho isa polelong ea ho qetela.(Litlaleho li tla hlaha ho latela tlhoko)

4. e tiisetso ea ho fana ka karabo nakong ea lihora tse 24(hangata ka hora e tšoanang)

5. U ka fumana mefuta e meng ea li-stock, ho tsamaisoa ha leloala ka ho fokotsa nako ea tlhahiso.

6. Re inehetse ka ho feletseng ho bareki ba rona. Haeba ho ke ke ha khoneha ho finyella litlhoko tsa hau ka mor'a ho hlahloba likhetho tsohle, re ke ke ra u khelosa ka ho etsa litšepiso tsa bohata tse tla theha likamano tse ntle tsa bareki.

Lifeme le Lipontšo


undefined


ITEANYE LE RONA


Phone&Wechat&Whatsup: +8618707335571

Patlisiso:info@retopcarbide.com


RE THUSOE MOSE
Ka kopo, romella molaetsa 'me re tla khutlela ho uena!
LIHLAHISO TSE HLAHANG
Wet diamond polishing pads for graniteRing ea Tiiso ea Tungsten Carbide

Ring ea Tiiso ea Tungsten Carbide

Thepa e tala bakeng sa selikalikoe sa carbide seal ke tungsten carbide e nang le phofo ea cobalt, ka hlobo e itseng e hatelitsoeng ka har'a selikalikoe, 'me qetellong e e kenye ka sebōping sa vacuum kapa sebōpi sa phokotso ea hydrogen.Setlama sena se hlahisa tšepe e thata ka ho fetisisa, e thata ea ceramic-metal, e nang le khanyetso e ntle ea ho apara, 'me e teteaneng ho feta lisebelisoa tse ling. Setifikeiti sa sekontiri sa carbide se sebelisoa haholo indastering ea tiiso ea mochini
Wet diamond polishing pads for graniteMehele e meholo ea Tiiso ea Carbide e nang le Nickel Binder

Mehele e meholo ea Tiiso ea Carbide e nang le Nickel Binder

The Big Carbide Seal Rings e nang le Nickel Binder ke likarolo tse entsoeng ka nepo tse etselitsoeng ho fana ka ts'ebetso e ikhethang ea ho tiisa lits'ebetsong tse fapaneng tsa indasteri. Masale ana a na le bophara ba ka ntle ho tloha ho limilimithara tse 320 ho isa ho tse 600 le bophara bo ka hare bo pakeng tsa 250 le 450 limilimithara. Ka mamello e tiileng ea hoo e ka bang +/- 0.5mm, mehele ena ea tiiso e fana ka tekanyo e phahameng ea ho nepahala le r.
Wet diamond polishing pads for graniteCarbide bushing steel case bakeng sa indasteri ea pompo

Carbide bushing steel case bakeng sa indasteri ea pompo

Lihlahla tsa rona tsa Tungsten Carbide Bushings li hahiloe ho mamella maemo a thata ka ho fetisisa a kopaneng le indasteri ea pompo. Boholo bo ka hare, bo entsoeng ka tungsten carbide ea boleng bo holimo, bo bontša ho thatafala ho sa tloaelehang le ho hanyetsa ho apara. Sena se tiisa hore ho na le khanyetso e phahameng ea ho khoholeha, khoholeho ea mobu le ho bola, ho lelefatsa bophelo ba sehlahla haholo. Nyeoe ea tšepe e ka ntle e fana ka lera le eketsehileng la matla
Wet diamond polishing pads for graniteCemented Carbide Mechanical Seal Ring bakeng sa Pompo ea Metsi

Cemented Carbide Mechanical Seal Ring bakeng sa Pompo ea Metsi

E entsoe ho tloha ho premium cemented carbide, selikalikoe sena sa tiiso sa mochini se fana ka khanyetso e ikhethang khahlano le kutu, e etsa hore e be se loketseng bakeng sa ts'ebeliso ea lipompo tsa metsi. Ho sa tsotellehe hore na u sebetsana le maro a mabifi, lik'hemik'hale, kapa likaroloana tsa abrasive, reng ea rona ea tiiso e tla mamella le ho boloka botšepehi ba eona ha nako e ntse e ea.
Wet diamond polishing pads for graniteSesae sa tiiso sa mochini oa Cemented Carbide

Sesae sa tiiso sa mochini oa Cemented Carbide

Setlama sena se hlahisa tšepe e thata ka ho fetisisa, e thata ea ceramic-metal, e nang le khanyetso e ntle ea ho apara, 'me e teteaneng ho feta lisebelisoa tse ling. Reng e entsoeng ka samente ea carbide seal e sebelisoa haholo indastering ea tiiso ea mochini, hammoho le indastering ea petrochemical ka lebaka la ts'ebetso ea eona e ntle ea ho sesa le ho hanyetsa kutu.
Wet diamond polishing pads for graniteRing ea Tiiso ea Carbide e hanyetsanang le Corrosion

Ring ea Tiiso ea Carbide e hanyetsanang le Corrosion

E etselitsoe mefuta e mengata ea ts'ebeliso, Mechanical Carbide Seal Ring ea rona ke karolo e sebetsang ka mefuta e mengata e ipabolang liindastering tse fapaneng, ho kenyeletsoa likoloi, tlhahiso, oli le khase, le tse ling. E entsoe ka ho khetheha ho fana ka mokhoa o ka tšeptjoang oa ho tiisa, ho thibela ho lutla le ho boloka ts'ebetso e nepahetseng maemong a hlokang.
Wet diamond polishing pads for graniteLihlahla tsa Tungsten Carbide

Lihlahla tsa Tungsten Carbide

Tungsten Carbide Bushings ke likarolo tse entsoeng ka mokhoa o nepahetseng tse entsoeng ka motsoako oa alloy e thata, carbide e entsoeng ka samente, tšepe ea tungsten le tungsten carbide. Li-bushings tsena li tumme ka ho ikemela ha tsona ka mokhoa o ikhethang, li-anti-corrosion properties, le matla a matla a ho hatella.
Wet diamond polishing pads for graniteTungsten Carbide Bushing ka boholo bo nyane

Tungsten Carbide Bushing ka boholo bo nyane

Tungsten Carbide Bushings ke likarolo tse entsoeng ka mokhoa o nepahetseng tse entsoeng ka motsoako oa alloy e thata, carbide e entsoeng ka samente, tšepe ea tungsten le tungsten carbide. Li-bushings tsena li tumme ka ho ikemela ha tsona ka mokhoa o ikhethang, li-anti-corrosion properties, le matla a matla a ho hatella.
Wet diamond polishing pads for graniteLi-sleeves tsa Tungsten Carbide bakeng sa Lipompo tsa Slurry

Li-sleeves tsa Tungsten Carbide bakeng sa Lipompo tsa Slurry

Re hlahisa li-sleeves tsa rona tsa Tungsten Carbide bakeng sa Lipompo tsa Slurry - tharollo ea mantlha ea ho matlafatsa ts'ebetso le ts'ebetso ea sistimi ea hau ea ho pompa. Li entsoe ka mokhoa o nepahetseng 'me li entsoe ka tungsten carbide ea boleng bo holimo, matsoho ana a etselitsoe ho mamella liphephetso tse hlahisoang ke seretse se senyang le se senyang.
Wet diamond polishing pads for graniteLi-sleeve tsa Tungsten Carbide kapa Bushings

Li-sleeve tsa Tungsten Carbide kapa Bushings

Tungsten Carbide Sleeves kapa Bushings - tharollo e phethahetseng bakeng sa liindasteri tse hlokang ho tšoarella le ts'ebetso e ikhethang. E entsoe ka mokhoa o nepahetseng le o entsoeng ka tungsten carbide ea boleng bo holimo, matsoho / lihlahla tsa rona li etselitsoe ho sebetsa hantle lits'ebetsong tse thata moo ho hanyetsanang le ho ts'epahala ho leng bohlokoa haholo.
Wet diamond polishing pads for graniteTungsten Carbide Bottom Sleeve

Tungsten Carbide Bottom Sleeve

Invest in durability with our Tungsten Carbide Bottom Sleeves. Engineered for precision and versatility, these sleeves redefine longevity in industrial applications. Discover cost savings and uninterrupted productivity today
Copyright © Zhuzhou Retop Carbide Co., Ltd / sitemap / XML / Privacy Policy   

Lehae

LIHLAHISO

Mabapi le rona

Ikopanye