Lebitso la Sehlahisoa:YL10.2 Tungsten Carbide Rods
Karolo:E ntle, e mahareng, e mahoashe joalo ka ha ho hlokahala
Kereiti:YL10.2 K10.K20.
Likaroloana:ho nepahala ho phahameng, Ground h5, h6, h7
Stock:setoko se lekaneng bakeng sa boholo bo tloaelehileng le kereiti
Tlhaloso:
Ho Retop Carbide, re fana ka lithupa tsa boleng bo holimo tsa tungsten carbide tse sebetsanang le mefuta e mengata ea lits'ebetso tsa indasteri. Lithupa tsa rona li fumaneha ka limaraka tse fapaneng le boholo ba likaroloana, ho netefatsa hore u fumana tharollo e phethahetseng bakeng sa litlhoko tsa hau tse ikhethang.
1.Ho nepahala ho phahameng:Lithupa tsa rona tsa tungsten carbide li entsoe ka taolo e tiileng ea boleng, ho netefatsa hore li fihlella maemo a holimo ka ho fetesisa. Li fumaneha ho Ground h5, h6, le h7 tolerances, tse loketseng mefuta e fapaneng ea lisebelisoa tsa machining le lisebelisoa.
2.Ho tšoarella ho ikhethang:Tungsten carbide e tumme ka ho thatafala ha eona ho makatsang le ho se mamelle. Lithupa tsa rona li entsoe ka thepa ea boleng bo phahameng, ho netefatsa hore li fana ka ts'ebetso e tšoarellang nako e telele libakeng tse hlokang ka ho fetisisa.
3. Lits'ebetso tse fapaneng:Lithupa tsa rona tsa tungsten carbide li loketse mefuta e mengata ea lisebelisoa, ho kenyelletsa le li-mill, li-drill, reamers, le lisebelisoa tsa ho seha bakeng sa ho sebetsa ka tšepe, ho etsa lehong le indasteri ea likoloi.
4.Customizable Tharollo:Re utloisisa hore litlhoko tsa moreki e mong le e mong li ikhethile. Ke ka lebaka leo re fanang ka likhetho tsa customizable bakeng sa likaroloana
Litlhaloso:
| Lebitso: | Molamu oa tungsten carbide |
| mabitso a mang: | carbide rod e entsoeng ka samente, litšepe tsa carbide, lithupa tsa carbide, rod e felileng ea carbide, lithupa tsa tungsten carbide tse nang le masoba. |
| Molamu o tiileng oa carbide: | Diameter 0.7- 45mm, bolelele 330/310mm |
| Lithupa tse nang le lesoba le bohareng la pholiso: | Diameter 4.5-20mm, bolelele 330/310mm |
| Lithupa tse nang le masoba a 2 a pholileng a helical: | OD3.3 – 20.3mm, ID0.4 – 2.0mm, bolelele 330mm |
| Lithupa tse nang le masoba a mabeli a otlolohileng a pholiso: | OD3.4 – 20.7mm, ID0.4 – 2.0mm, Bolelele 330mm |
| Stock: | Inventory e lekaneng bakeng sa boholo bo tloaelehileng le kereiti |
| Bokaholimo: | tse sa buloang kapa tse feliloeng li teng |
Chate ea Kereiti bakeng sa molamu oa tungsten carbide:
| Mofuta oa ISO | Kopana | K10-K20 | K20-K40 | K20-K40 | K20-K40 | K05-K10 | K40-K50 |
| WC + carbide e 'ngoe | % | 91 | 90 | 88 | 88 | 93.5 | 85 |
| Co | % | 9 | 10 | 12 | 12 | 6.5 | 15 |
| WC boholo ba lijo-thollo | μm | 0.4 | 0.8 | 0.6 | 0.4 | 0.6 | 0.8 |
| Botenya | g/㎝³ | 14.5 | 14.42 | 14.12 | 14.1 | 14.85 | 13.95 |
| Ho thatafala | Hv30 | 1890 | 1600 | 1580 | 1750 | 1890 | 1350 |
| Ho thatafala | HRA | 93.5 | 91.5 | 91.2 | 92.5 | 93.5 | 89.5 |
| TRS | N/mm² | 3800 | 4100 | 4200 | 4400 | 3700 | 3800 |
| Ho robeha ho thata | Mpa.m½ | 10.2 | 14.2 | 14.7 | 13.5 | 10.1 | 17.5 |
| matla a hatellang | kpsi | 1145 | 1015 | 1010 | 1109 | 1156 | 957 |
Ke Hobane'ng ha U Re Khetha:
1. U ka fumana boitsebiso bo phethahetseng ho ea ka tlhokahalo ea hau bonyane theko e ka khonehang.
2. Re boetse re fana ka Reworks, FOB, CFR, CIF, le litheko tsa ho fana ka ntlo le ntlo. Re fana ka tlhahiso ea hore u etse tumellano ea ho tsamaisa thepa e tla u baballa haholo.
3. Thepa eo re fanang ka eona e ka netefatsoa ka botlalo, ho tloha ho setifikeiti sa tlhahlobo ea thepa e tala ho isa polelong ea ho qetela.(Litlaleho li tla hlaha ho latela tlhoko)
4. e tiisetso ea ho fana ka karabo nakong ea lihora tse 24(hangata ka hora e tšoanang)
5. U ka fumana mefuta e meng ea li-stock, ho tsamaisoa ha leloala ka ho fokotsa nako ea tlhahiso.
6. Re inehetse ka ho feletseng ho bareki ba rona. Haeba ho ke ke ha khoneha ho finyella litlhoko tsa hau ka mor'a ho hlahloba likhetho tsohle, re ke ke ra u khelosa ka ho etsa litšepiso tsa bohata tse tla theha likamano tse ntle tsa bareki.
Lifeme le Lipontšo
ITEANYE LE RONA
Phone&Wechat&Whatsup: +8618707335571
Patlisiso:info@retopcarbide.com
