Tungsten Carbide Strip e nang le boholo bo fapaneng

Ka mokhoa o babatsehang oa ho hanyetsa le ho tiea ha tungsten carbide, likhoele tsa carbide tse samente li sebelisoa haholo ho VSI crusher, mechine e etsang lehlabathe, merafo, samente, metallurgy le indasteri ea boenjiniere ba hydropower.Solid carbide strip e kentsoe ka har'a sekotjana sa malebela a VSI Rotor, a ka theoang joalo ka hlooho ea hamore ho pshatla majwe, lefika le majwe.

lintho tse bonahalang: alloy e thata, carbide e entsoeng ka samente,
Boima: 14.0-14.8 g/cm3
boima: HRA89-90
Setifikeiti: ISO9001

Fumana Theko

TŠEBETSO TSA MORERO

Lebitso la Sehlahiswa:Tungsten Carbide Strip e nang le boholo bo fapaneng

Lintho tse bonahalang:alloy e thata, carbide e entsoeng ka samente,

Tekano:14.0-14.8 g/cm3

Ho thatafala: HRA89-90

Litifikeiti:ISO9001

Kereiti: K30

Tlhaloso:

Solid carbide strip e kentsoe ka har'a sekotjana sa malebela a VSI Rotor, a ka theoang joalo ka hlooho ea hamore ho pshatla majwe, lefika le majwe.

Tlhaloso:

Tlhaloso	bolelele	bophahamo	botenya
70x20S	70	20	10-20
109x10S	109	10	5-15
130x10S	130	10	5-15
260x20S	260	20	10-25
272x20S	272	20	10-25
330x220S	330	20	10-25

Likaroloana:

1. High ho apara ho hanyetsa ，100% thepa e tala

2. Ts'ebetso e phethahetseng, Phano e potlakileng

3. Tšusumetso e matla ea ho hanyetsa, boima bo phahameng

Ke Hobane'ng ha U Re Khetha:

1. U ka fumana boitsebiso bo phethahetseng ho ea ka tlhokahalo ea hau bonyane theko e ka khonehang.

2. Re boetse re fana ka Reworks, FOB, CFR, CIF, le litheko tsa ho fana ka ntlo le ntlo. Re fana ka tlhahiso ea hore u etse tumellano ea ho tsamaisa thepa e tla u baballa haholo.

3. Thepa eo re fanang ka eona e ka netefatsoa ka botlalo, ho tloha ho setifikeiti sa tlhahlobo ea thepa e tala ho isa polelong ea ho qetela.(Litlaleho li tla hlaha ho latela tlhoko)

4. e tiisetso ea ho fana ka karabo nakong ea lihora tse 24(hangata ka hora e tšoanang)

5. U ka fumana mefuta e meng ea li-stock, ho tsamaisoa ha leloala ka ho fokotsa nako ea tlhahiso.

6. Re inehetse ka ho feletseng ho bareki ba rona. Haeba ho ke ke ha khoneha ho finyella litlhoko tsa hau ka mor'a ho hlahloba likhetho tsohle, re ke ke ra u khelosa ka ho etsa litšepiso tsa bohata tse tla theha likamano tse ntle tsa bareki.

Lifeme le Lipontšo

undefined

ITEANYE LE RONA

Phone&Wechat&Whatsup: +8618707335571

Patlisiso:info@retopcarbide.com

RE THUSOE MOSE

Ka kopo, romella molaetsa 'me re tla khutlela ho uena!

LIHLAHISO TSE HLAHANG

Tungsten Carbide Strip bakeng sa VSI Crusher

Tungsten carbide poleiti ea mohlahare

Tungsten carbide Jaw plate le liner board li sebelisoa haholo-holo bakeng sa ho senya mohlahare. sebelisa tungsten carbide e ka ntlafatsa bophelo ba poleiti ea mohlahare, kahoo e ntlafatsa katleho ea tlhahiso ea sefate sa mohlahare le ho fokotsa litšenyehelo tsa tlhahiso.Mehlahare ea Tungsten carbide bakeng sa ho pshatla polysilicon e manganga haholoanyane, e na le bohloeki bo phahameng, 'me ha e silafatse thepa e pshatlehileng ea polysilicon. Kajeno, ho na le li-arc tse ngata

Carbide Jaw Crusher Plate

Carbide Jaw Plate ke sehlahisoa sa boleng bo holimo se etselitsoeng ho sebelisoa ho li-crushers tsa mohlahare. E entsoe ka 100% virgin tungsten carbide, e fana ka ts'ebetso e ikhethang le ts'ebetso lits'ebetsong tse boima. Letlapa lena la mohlahare oa carbide le entsoe ka ho khetheha ho mamella matla a tšusumetso.