POTSO
  • Carbide welding rod e nang le likaroloana tse chitja
  • Carbide welding rod e nang le likaroloana tse chitja
  • Carbide welding rod e nang le likaroloana tse chitja
  • Carbide welding rod e nang le likaroloana tse chitja
  • Carbide welding rod e nang le likaroloana tse chitja

Carbide welding rod e nang le likaroloana tse chitja

Molamu oa motsoako oa motsoako o entsoe ka motsoako oa granular le elastic matrix carbide, ho na le phallo e khethehileng holim'a metsi le mebala e le ho khetholla boholo ba granular. Lintho tse ka sehloohong tsa boholo ba likaroloana ke tungsten carbide, e leng boima bo ka bang HRA89-91. Matla a matla a ka bang 690MPa
  • Material: alloy ea boleng bo holimo e nang le motheo oa koporo kapa setsi sa nickel
  • boima: HRA89-91
  • Matla a matla: 690MPa
  • Likarolo: fusible, e bonolo bakeng sa welding
  • TŠEBETSO TSA MORERO

Lebitso la Sehlahisoa:Carbide welding rod e nang le likaroloana tse chitja

Boitsebiso:alloy ea boleng bo holimo e nang le motheo oa koporo kapa setsi sa nickel

Ho thatafala: HRA89-91

Matla a tšepe:690MPa

Likaroloana:fusible, e bonolo bakeng sa ho cheselletsa

Boholo:3-5mm, 6-8mm, etc 


Tlhaloso:

Molamu oa motsoako oa motsoako o entsoe ka motsoako oa granular le elastic matrix carbide, ho na le phallo e khethehileng holim'a metsi le mebala e le ho khetholla boholo ba granular. Lintho tse ka sehloohong tsa boholo ba likaroloana ke tungsten carbide, e leng boima bo ka bang HRA89-91. Matla a matla a ka bang 690MPa

undefined


Melemo:


High Wear Resistance:Tungsten carbide ke e 'ngoe ea lisebelisoa tse thata ka ho fetisisa, kahoo e fana ka khanyetso e ntle ea ho apara, esita le libakeng tse thata.


Corrosion Resistance:Tungsten carbide e boetse e hanyetsana haholo le kutu 'me e khona ho mamella ho pepesehela lik'hemik'hale le li-acid tse ngata.


Matla a Phahameng:Lithupa tse kopaneng tsa Tungsten carbide li matla haholo ebile lia tšoarella, li etsa hore e be tse loketseng lits'ebetso tse batloang haholo.


Mefuta-futa:Lithupa tsa Tungsten carbide composite li ka sebelisoa mefuteng e mengata ea ts'ebeliso, ho kenyeletsoa merafo, kaho, ho cheka oli le khase, le ho etsa tlhahiso.


Ka kakaretso, lithupa tsa tungsten carbide composite li fana ka ts'ebetso e ntle haholo le ho tšoarella, e leng se etsang hore e be khetho e tsebahalang bakeng sa lits'ebetso tse ngata tsa indasteri.


Litlhaloso:


Lebitso la sehlahisoa:molamu oa motsoako oa tungsten carbide
Mabitso a mang:molamu oa motsoako oa motsoako
molamu oa motsoako oa tungsten carbide
molamu oa motsoako oa carbide o entsoeng ka samente
molamu oa motsoako oa carbide
melamu ea ho cheselletsa
tungsten carbide composite brazing rod
carbide copper welding rod
Lithupa tsa ho tjheseletsa tsa YD
Boholo bo khethehileng ba likaroloanaKa bobeli sebopeho le boholo ba ka customized
boholo ba karolo ea carbide1.6mm -3.2mm,3.2mm -4.8mm,4.8mm -6.4mm
6.4mm -8.0mm,8.0mm -9.5mm
bolelele ba molamu wa welding280mm, 450mm
boima ba molamu wa weldinghoo e ka bang 500g / pc
Likaroloanalikaroloana tsa angular kapa likaroloana tsa OEM

ho kenella hantle


Lintlha tsa ho paka:



undefinedundefinedundefinedundefined


Mophato oa molamu oa motsoako oa tungsten carbide:


KereitiLitaba tsa sebopeho sa lik'hemik'hale (%)
Cu+Zn+SnWCCo
Cu-3030±258-705.0-5.1
Cu-4040±253-564.6-4.8
Cu-4545±248-524.2-4.5
Cu-5050±244-483.8-4.2




KereitiLitaba tsa sebopeho sa lik'hemik'hale (%)
Ni+Cu+ZnWCCo
Ni-3030±257-655.1-5.8
Ni-4040±253-574.6-5.0
Ni-4545±249-524.2-4.5
Ni-5050±244-483.8-4.1


Lisebelisoa tsa lithupa tsa welding tsa YD:


undefinedundefinedundefined



Ke Hobane'ng ha U Re Khetha:

1. U ka fumana boitsebiso bo phethahetseng ho ea ka tlhokahalo ea hau bonyane theko e ka khonehang.

2. Re boetse re fana ka Reworks, FOB, CFR, CIF, le litheko tsa ho fana ka ntlo le ntlo. Re fana ka tlhahiso ea hore u etse tumellano ea ho tsamaisa thepa e tla u baballa haholo.

3. Thepa eo re fanang ka eona e ka netefatsoa ka botlalo, ho tloha ho setifikeiti sa tlhahlobo ea thepa e tala ho isa polelong ea ho qetela.(Litlaleho li tla hlaha ho latela tlhoko)

4. e tiisetso ea ho fana ka karabo nakong ea lihora tse 24(hangata ka hora e tšoanang)

5. U ka fumana mefuta e meng ea li-stock, ho tsamaisoa ha leloala ka ho fokotsa nako ea tlhahiso.

6. Re inehetse ka ho feletseng ho bareki ba rona. Haeba ho ke ke ha khoneha ho finyella litlhoko tsa hau ka mor'a ho hlahloba likhetho tsohle, re ke ke ra u khelosa ka ho etsa litšepiso tsa bohata tse tla theha likamano tse ntle tsa bareki.

Lifeme le Lipontšo


undefined


ITEANYE LE RONA


Phone&Wechat&Whatsup: +8618707335571

Patlisiso:info@retopcarbide.com


RE THUSOE MOSE
Ka kopo, romella molaetsa 'me re tla khutlela ho uena!
LIHLAHISO TSE HLAHANG
Wet diamond polishing pads for graniteTungsten Carbide Composite Rod

Tungsten Carbide Composite Rod

Molamu oa motsoako oa motsoako o entsoe ka motsoako oa granular le elastic matrix carbide, ho na le phallo e khethehileng holim'a metsi le mebala e le ho khetholla boholo ba granular. Lintho tse ka sehloohong tsa boholo ba likaroloana ke tungsten carbide, e leng boima bo ka bang HRA89-91. Matla a matla a ka bang 690MPaTs'ebetso e ikhethang ea ho sila le ho hanyetsa carbide ke molemo oa lithupa tsa welding. Ke wi
Wet diamond polishing pads for graniteTungsten carbide electrode le gradule

Tungsten carbide electrode le gradule

Molamu oa motsoako oa motsoako o entsoe ka motsoako oa granular le elastic matrix carbide, ho na le phallo e khethehileng holim'a metsi le mebala e le ho khetholla boholo ba granular. Lintho tse ka sehloohong tsa boholo ba likaroloana ke tungsten carbide, e leng boima bo ka bang HRA89-91. Matla a matla a ka bang 690MPa
Copyright © Zhuzhou Retop Carbide Co., Ltd / sitemap / XML / Privacy Policy   

Lehae

LIHLAHISO

Mabapi le rona

Ikopanye