Lebitso la Sehlahisoa:Tungsten carbide welding rod e nang le likaroloana tse chitja
Boitsebiso:alloy ea boleng bo holimo e nang le motheo oa koporo kapa setsi sa nickel
Ho thatafala:HRA89-91
Matla a tšepe: 690MPa
Likaroloana:fusible, e bonolo bakeng sa ho cheselletsa
Boholo:3-5mm, 6-8mm, etc
Tlhaloso:
Molamu oa motsoako oa motsoako o entsoe ka motsoako oa granular le elastic matrix carbide, ho na le phallo e khethehileng holim'a metsi le mebala e le ho khetholla boholo ba granular. Lintho tse ka sehloohong tsa boholo ba likaroloana ke tungsten carbide, e leng boima bo ka bang HRA89-91. Matla a matla a ka bang 690MPa
Melemo:
High Wear Resistance:Tungsten carbide ke e 'ngoe ea lisebelisoa tse thata ka ho fetisisa, kahoo e fana ka khanyetso e ntle ea ho apara, esita le libakeng tse thata.
Corrosion Resistance:Tungsten carbide e boetse e hanyetsana haholo le kutu 'me e khona ho mamella ho pepesehela lik'hemik'hale le li-acid tse ngata.
Matla a Phahameng:Lithupa tse kopaneng tsa Tungsten carbide li matla haholo ebile lia tšoarella, li etsa hore e be tse loketseng lits'ebetso tse batloang haholo.
Mefuta-futa:Lithupa tsa Tungsten carbide composite li ka sebelisoa mefuteng e mengata ea ts'ebeliso, ho kenyeletsoa merafo, kaho, ho cheka oli le khase, le ho etsa tlhahiso.
Ka kakaretso, lithupa tsa tungsten carbide composite li fana ka ts'ebetso e ntle haholo le ho tšoarella, e leng se etsang hore e be khetho e tsebahalang bakeng sa lits'ebetso tse ngata tsa indasteri.
Litlhaloso:
| Lebitso la sehlahisoa: | molamu oa motsoako oa tungsten carbide |
| Mabitso a mang: | molamu oa motsoako oa motsoako |
| molamu oa motsoako oa tungsten carbide |
| molamu oa motsoako oa carbide o entsoeng ka samente |
| molamu oa motsoako oa carbide |
| melamu ea ho cheselletsa |
| tungsten carbide composite brazing rod |
| carbide copper welding rod |
| Lithupa tsa ho tjheseletsa tsa YD |
| Boholo bo khethehileng ba likaroloana | Ka bobeli sebopeho le boholo ba ka customized |
| boholo ba karolo ea carbide | 1.6mm -3.2mm，3.2mm -4.8mm，4.8mm -6.4mm |
| 6.4mm -8.0mm，8.0mm -9.5mm |
| bolelele ba molamu wa welding | 280mm, 450mm |
| boima ba molamu wa welding | hoo e ka bang 500g / pc |
| Likaroloana | likaroloana tsa angular kapa likaroloana tsa OEM |
| ho kenella hantle |
Lintlha tsa ho paka:
Mophato oa molamu oa motsoako oa tungsten carbide:
| Kereiti | Litaba tsa sebopeho sa lik'hemik'hale (%) |
| Cu+Zn+Sn | WC | Co |
| Cu-30 | 30±2 | 58-70 | 5.0-5.1 |
| Cu-40 | 40±2 | 53-56 | 4.6-4.8 |
| Cu-45 | 45±2 | 48-52 | 4.2-4.5 |
| Cu-50 | 50±2 | 44-48 | 3.8-4.2 |
|
|
|
|
| Kereiti | Litaba tsa sebopeho sa lik'hemik'hale (%) |
| Ni+Cu+Zn | WC | Co |
| Ni-30 | 30±2 | 57-65 | 5.1-5.8 |
| Ni-40 | 40±2 | 53-57 | 4.6-5.0 |
| Ni-45 | 45±2 | 49-52 | 4.2-4.5 |
| Ni-50 | 50±2 | 44-48 | 3.8-4.1
|
Lisebelisoa tsa lithupa tsa welding tsa YD:
Ke Hobane'ng ha U Re Khetha:
1. U ka fumana boitsebiso bo phethahetseng ho ea ka tlhokahalo ea hau bonyane theko e ka khonehang.
2. Re boetse re fana ka Reworks, FOB, CFR, CIF, le litheko tsa ho fana ka ntlo le ntlo. Re fana ka tlhahiso ea hore u etse tumellano ea ho tsamaisa thepa e tla u baballa haholo.
3. Thepa eo re fanang ka eona e ka netefatsoa ka botlalo, ho tloha ho setifikeiti sa tlhahlobo ea thepa e tala ho isa polelong ea ho qetela.(Litlaleho li tla hlaha ho latela tlhoko)
4. e tiisetso ea ho fana ka karabo nakong ea lihora tse 24(hangata ka hora e tšoanang)
5. U ka fumana mefuta e meng ea li-stock, ho tsamaisoa ha leloala ka ho fokotsa nako ea tlhahiso.
6. Re inehetse ka ho feletseng ho bareki ba rona. Haeba ho ke ke ha khoneha ho finyella litlhoko tsa hau ka mor'a ho hlahloba likhetho tsohle, re ke ke ra u khelosa ka ho etsa litšepiso tsa bohata tse tla theha likamano tse ntle tsa bareki.
Lifeme le Lipontšo
ITEANYE LE RONA
Phone&Wechat&Whatsup: +8618707335571
Patlisiso:info@retopcarbide.com
