Igama lemveliso:YL10.2 Iintonga zeTungsten Carbide
Inqaku:Ilungile, iPhakathi, irhabaxa njengoko kufuneka
Ibakala:YL10.2 K10.K20.
Iimbonakalo:ukuchaneka okuphezulu, Umhlaba h5, h6, h7
Isitokhwe:isitokhwe esaneleyo sobukhulu obusemgangathweni kunye nebakala
Inkcazo:
Kwi-Retop Carbide, sinikezela ngeentonga eziphezulu ze-tungsten carbide ezibonelela uluhlu olubanzi lwezicelo zoshishino. Iintonga zethu zifumaneka kumabakala ahlukeneyo kunye nobukhulu bamasuntswana, ukuqinisekisa ukuba ufumana isisombululo esifanelekileyo kwiimfuno zakho ezithile.
1.Ukuchaneka okuphezulu:Iintsimbi zethu ze-tungsten carbide zenziwe ngolawulo olungqongqo lwekhwalithi, ziqinisekisa ukuba zihlangabezana nemigangatho ephezulu yokuchaneka. Zifumaneka kwi-Ground h5, i-h6, kunye ne-h7 yokunyamezela, ifanelekile kwiindidi ezahlukeneyo ze-machining kunye nezixhobo zokusebenza.
2.Ukuqina okuKhethekileyo:I-Tungsten carbide idume ngobulukhuni bayo obumangalisayo kunye nokumelana nokunxiba. Iintonga zethu zenziwe kwizinto ezisemgangathweni ophezulu, ziqinisekisa ukuba zibonelela ngokusebenza ixesha elide kwiindawo ezifuna kakhulu.
3.Usetyenziso oluNxulunyanisiweyo:Iintsimbi zethu ze-tungsten carbide zilungele uluhlu olubanzi lwezicelo, kubandakanywa i-mill end, i-drill, i-reamers, kunye nezixhobo zokusika zesinyithi, i-woodworking, kunye nemizi-mveliso yeemoto.
4.Izisombululo ezinokwenzeka:Siyaqonda ukuba iimfuno zomthengi ngamnye zahlukile. Yiyo loo nto sinikezela ngeendlela ezinokwenziwa ngokwezifiso zamasuntswana
Iinkcukacha:
| Igama: | Intonga ye-tungsten carbide |
| amanye amagama: | I-carbide rod enesamente, imivalo ye-carbide, intonga ye-carbide, intonga ye-carbide egqityiweyo, i-tungsten carbide rod enemingxuma |
| Intonga ye-carbide engagungqiyo: | Ububanzi 0.7- 45mm, ubude 330/310mm |
| Iinduku ezinomngxunya wokupholisa osembindini: | Ububanzi 4.5-20mm, ubude 330/310mm |
| Iinduku ezinemingxuma emi-2 yokupholisa i-helical: | OD3.3 – 20.3mm, ID0.4 – 2.0mm, ubude 330mm |
| Iinduku ezinemingxuma emibini ethe tye yokupholisa: | OD3.4 – 20.7mm, ID0.4 – 2.0mm, Ubude 330mm |
| Isitokhwe: | I-inventri eyaneleyo yobukhulu obuqhelekileyo kunye nebakala |
| Umphezulu: | ezigqityiweyo okanye ezigqityiweyo ziyafumaneka |
Itshathi yeBanga le-tungsten carbide intonga:
| Uluhlu lwe-ISO | Manyani | K10-K20 | K20-K40 | K20-K40 | K20-K40 | K05-K10 | K40-K50 |
| I-WC + enye i-carbide | % | 91 | 90 | 88 | 88 | 93.5 | 85 |
| Co | % | 9 | 10 | 12 | 12 | 6.5 | 15 |
| Ubungakanani beenkozo zeWC | μm | 0.4 | 0.8 | 0.6 | 0.4 | 0.6 | 0.8 |
| Ukuxinana | g/㎝³ | 14.5 | 14.42 | 14.12 | 14.1 | 14.85 | 13.95 |
| Ukuqina | Hv30 | 1890 | 1600 | 1580 | 1750 | 1890 | 1350 |
| Ukuqina | HRA | 93.5 | 91.5 | 91.2 | 92.5 | 93.5 | 89.5 |
| TRS | N/mm² | 3800 | 4100 | 4200 | 4400 | 3700 | 3800 |
| Ukuqina kokwaphuka | Mpa.m½ | 10.2 | 14.2 | 14.7 | 13.5 | 10.1 | 17.5 |
| amandla oxinzelelo | kpsi | 1145 | 1015 | 1010 | 1109 | 1156 | 957 |
Kutheni Ukhetha Thina:
1. Unokufumana izinto ezigqibeleleyo ngokwemfuno yakho ngexabiso elincinci elinokwenzeka.
2. Sikwabonelela ngeeReworks, FOB, CFR, CIF, kunye namaxabiso okuhanjiswa kwendlu ukuya emnyango. Sicebisa ukuba wenze isivumelwano sokuthumela ngenqanawe okuya kuba nokonga kakhulu.
3. Izinto esizibonelelayo zingqinisiseka ngokupheleleyo, ukusuka kwisatifikethi sovavanyo lwemathiriyeli ekrwada ukuya kwisiteyitimenti somgangatho wokugqibela.(Iingxelo ziya kubonisa ngokwemfuneko)
4. isiqinisekiso sokunika impendulo kwiiyure ezingama-24(ngokuqhelekileyo ngeyure enye)
5. Unokufumana ezinye iindlela zesitokhwe, ukuhanjiswa kwelitye kunye nokunciphisa ixesha lokuvelisa.
6. Sizinikezele ngokupheleleyo kubathengi bethu. Ukuba akunakwenzeka ukuhlangabezana neemfuno zakho emva kokuvavanya zonke iinketho, asiyi kukukhohlisa ngokwenza izithembiso zobuxoki eziza kudala ubudlelwane obuhle kubathengi.
Iifektri kunye neMiboniso
QHAGAMSHELANA NATHI
Ifowuni&Wechat&Whatsup: +8618707335571
Umbuzo:info@retopcarbide.com
