Igama lemveliso:YD intonga ye-welding edibeneyo
Izinto:umgangatho ophezulu we-alloy eqinile kunye nesiseko sobhedu okanye isiseko se-nickel
Ukuqina: HRA89-91
Tensile strength: 690MPa
Iimbonakalo:fusible, kulula ukuwelda
Inkcazelo:
Intonga ye-alloy edibeneyo yenziwe nge-alloy granular kunye ne-elastic matrix carbide, kukho i-flux ekhethekileyo phezu komhlaba kunye nombala ukwenzela ukuchonga ubungakanani begranular. Izinto eziphambili zesayizi ye-particle yi-tungsten carbide, obunzima malunga ne-HRA89-91. Amandla okuqina malunga ne-690MPa
Ukusebenza okugqwesileyo kokugaya kunye nokuxhatshazwa kokugqoka kwe-carbide yinzuzo yeentonga ze-welding. Isetyenziswe ngokubanzi kwioli, imigodi, ikhemikhali yamalahle, i-geology, i-architecture, kwaye isetyenziswa ngokuqhelekileyo kwisixhobo sokuhla, njengesixhobo sokusika, izixhobo zokuloba ityhubhu, ukuzinzisa njalo njalo.
Kutheni ukhetha intonga edibeneyo ye-carbide kwi-Retop Carbide:
1.I-alloy granular material yenziwe ngekhwalithi ephezulu ye-YG8 yezinto ezinyulu ezityunyuziweyo ngehamile ephezulu, kwaye imathiriyeli icocekile kwaye icocekile.
2.Iingqungquthela ze-alloy zigcwele i-polyhedral particles, kwaye umphumo wokusika kunye nokuxhatshazwa kokugqoka kukuhle kakhulu.
3.Ubhedu kunye ne-alloy particles zinokudityaniswa kakuhle, ubhedu kunye ne-alloy particles ziboshwe ngokulinganayo kwaye umphumo we-welding ulungile kakhulu.
Iinkcukacha:
| Igama lemveliso: | intonga edibeneyo ye-tungsten carbide |
| Amanye amagama: | intonga ye-alloy edibeneyo |
| intonga edibeneyo ye-tungsten carbide |
| intonga ehlanganisiweyo ye-carbide |
| intonga edibeneyo ye-carbide |
| iintonga ze-welding |
| tungsten carbide composite intonga brazing |
| carbide copper welding intonga |
| Iintsimbi zokuwelda zeYD |
| Ubungakanani obukhethekileyo bamasuntswana | Zombini imilo kunye nobukhulu bunokwenziwa ngokwezifiso |
| ubungakanani besuntswana le-carbide | 1.6mm -3.2mm，3.2mm -4.8mm，4.8mm -6.4mm |
| 6.4mm -8.0mm，8.0mm -9.5mm |
| ubude bentonga ye-welding | 280mm, 450mm |
| ubunzima bentonga ye-welding | malunga ne-500g / pc |
| Iimbonakalo | amasuntswana eengular okanye amasuntswana OEM |
| ukungena kakuhle |
Iifoto zeCarbide particle:
Ibakala le-tungsten carbide intonga edibeneyo:
| IBanga | Umxholo wokwakheka kweekhemikhali (%) |
| Cu+Zn+Sn | WC | Co |
| Cu-30 | 30±2 | 58-70 | 5.0-5.1 |
| Cu-40 | 40±2 | 53-56 | 4.6-4.8 |
| Cu-45 | 45±2 | 48-52 | 4.2-4.5 |
| Cu-50 | 50±2 | 44-48 | 3.8-4.2 |
|
|
|
|
| IBanga | Umxholo wokwakheka kweekhemikhali (%) |
| Ni+Cu+Zn | WC | Co |
| Ni-30 | 30±2 | 57-65 | 5.1-5.8 |
| Ni-40 | 40±2 | 53-57 | 4.6-5.0 |
| Ni-45 | 45±2 | 49-52 | 4.2-4.5 |
| Ni-50 | 50±2 | 44-48 | 3.8-4.1 |
Ukusetyenziswa kweentonga zokuwelda zeYD:
Kutheni Ukhetha Thina:
1. Unokufumana izinto ezigqibeleleyo ngokwemfuno yakho ngexabiso elincinci elinokwenzeka.
2. Sikwabonelela ngeeReworks, FOB, CFR, CIF, kunye namaxabiso okuhanjiswa kwendlu ukuya emnyango. Sicebisa ukuba wenze isivumelwano sokuthumela ngenqanawe okuya kuba nokonga kakhulu.
3. Izinto esizibonelelayo zingqinisiseka ngokupheleleyo, ukusuka kwisatifikethi sovavanyo lwemathiriyeli ekrwada ukuya kwisiteyitimenti somgangatho wokugqibela.(Iingxelo ziya kubonisa ngokwemfuneko)
4. isiqinisekiso sokunika impendulo kwiiyure ezingama-24(ngokuqhelekileyo ngeyure enye)
5. Unokufumana ezinye iindlela zesitokhwe, ukuhanjiswa kwelitye kunye nokunciphisa ixesha lokuvelisa.
6. Sizinikezele ngokupheleleyo kubathengi bethu. Ukuba akunakwenzeka ukuhlangabezana neemfuno zakho emva kokuvavanya zonke iinketho, asiyi kukukhohlisa ngokwenza izithembiso zobuxoki eziza kudala ubudlelwane obuhle kubathengi.
Iifektri kunye neMiboniso
QHAGAMSHELANA NATHI
Ifowuni&Wechat&Whatsup: +8618707335571
Umbuzo:info@retopcarbide.com
