Igama lemveliso:Intonga ye-tungsten ye-welding ye-welding eneengqungquthela ezijikelezileyo
Izinto:umgangatho ophezulu we-alloy eqinile kunye nesiseko sobhedu okanye isiseko se-nickel
Ukuqina:HRA89-91
Tensile strength: 690MPa
Iimbonakalo:fusible, kulula ukuwelda
Ubungakanani:3-5mm, 6-8mm, etc
Inkcazelo:
Intonga ye-alloy edibeneyo yenziwe nge-alloy granular kunye ne-elastic matrix carbide, kukho i-flux ekhethekileyo phezu komhlaba kunye nombala ukwenzela ukuchonga ubungakanani begranular. Izinto eziphambili zesayizi ye-particle yi-tungsten carbide, obunzima malunga ne-HRA89-91. Amandla okuqina malunga ne-690MPa
Izinto eziluncedo:
Ukuxhathisa okuPhezulu:I-Tungsten carbide yenye yezona zinto zinzima kakhulu, ngoko ke ibonelela ngokugqwesa ukuxhathisa ukunxiba, nakwiindawo ezinzima.
Ukuxhathisa ukonakala:I-tungsten carbide iyakwazi ukumelana nokubola kwaye inokumelana nokuvezwa kwiikhemikhali ezininzi kunye neeasidi.
Amandla aphezulu:Iintonga zeTungsten carbide ezihlanganisiweyo zomelele kakhulu kwaye zomelele, zizenza zilungele usetyenziso olufunayo.
Ukuguquguquka:I-tungsten carbide composite rods ingasetyenziselwa kwizicelo ezininzi, kubandakanywa imigodi, ukwakhiwa, i-oyile kunye negesi yokugaya, kunye nokuvelisa.
Ngokubanzi, i-tungsten carbide composite rods ibonelela ngokusebenza okugqwesileyo kunye nokuqina, okubenza babe lukhetho oludumileyo kwizicelo ezininzi zamashishini.
Iinkcukacha:
| Igama lemveliso: | intonga edibeneyo ye-tungsten carbide |
| Amanye amagama: | intonga ye-alloy edibeneyo |
| intonga edibeneyo ye-tungsten carbide |
| intonga ehlanganisiweyo ye-carbide |
| intonga edibeneyo ye-carbide |
| iintonga ze-welding |
| tungsten carbide composite intonga brazing |
| carbide copper welding intonga |
| Iintsimbi zokuwelda zeYD |
| Ubungakanani obukhethekileyo bamasuntswana | Zombini imilo kunye nobukhulu bunokwenziwa ngokwezifiso |
| ubungakanani besuntswana le-carbide | 1.6mm -3.2mm，3.2mm -4.8mm，4.8mm -6.4mm |
| 6.4mm -8.0mm，8.0mm -9.5mm |
| ubude bentonga ye-welding | 280mm, 450mm |
| ubunzima bentonga ye-welding | malunga ne-500g / pc |
| Iimbonakalo | amasuntswana eengular okanye amasuntswana OEM |
| ukungena kakuhle |
Iinkcukacha zokupakisha:
Ibakala le-tungsten carbide intonga edibeneyo:
| IBanga | Umxholo wokwakheka kweekhemikhali (%) |
| Cu+Zn+Sn | WC | Co |
| Cu-30 | 30±2 | 58-70 | 5.0-5.1 |
| Cu-40 | 40±2 | 53-56 | 4.6-4.8 |
| Cu-45 | 45±2 | 48-52 | 4.2-4.5 |
| Cu-50 | 50±2 | 44-48 | 3.8-4.2 |
|
|
|
|
| IBanga | Umxholo wokwakheka kweekhemikhali (%) |
| Ni+Cu+Zn | WC | Co |
| Ni-30 | 30±2 | 57-65 | 5.1-5.8 |
| Ni-40 | 40±2 | 53-57 | 4.6-5.0 |
| Ni-45 | 45±2 | 49-52 | 4.2-4.5 |
| Ni-50 | 50±2 | 44-48 | 3.8-4.1
|
Ukusetyenziswa kweentonga zokuwelda zeYD:
Kutheni Ukhetha Thina:
1. Unokufumana izinto ezigqibeleleyo ngokwemfuno yakho ngexabiso elincinci elinokwenzeka.
2. Sikwabonelela ngeeReworks, FOB, CFR, CIF, kunye namaxabiso okuhanjiswa kwendlu ukuya emnyango. Sicebisa ukuba wenze isivumelwano sokuthumela ngenqanawe okuya kuba nokonga kakhulu.
3. Izinto esizibonelelayo zingqinisiseka ngokupheleleyo, ukusuka kwisatifikethi sovavanyo lwemathiriyeli ekrwada ukuya kwisiteyitimenti somgangatho wokugqibela.(Iingxelo ziya kubonisa ngokwemfuneko)
4. isiqinisekiso sokunika impendulo kwiiyure ezingama-24(ngokuqhelekileyo ngeyure enye)
5. Unokufumana ezinye iindlela zesitokhwe, ukuhanjiswa kwelitye kunye nokunciphisa ixesha lokuvelisa.
6. Sizinikezele ngokupheleleyo kubathengi bethu. Ukuba akunakwenzeka ukuhlangabezana neemfuno zakho emva kokuvavanya zonke iinketho, asiyi kukukhohlisa ngokwenza izithembiso zobuxoki eziza kudala ubudlelwane obuhle kubathengi.
Iifektri kunye neMiboniso
QHAGAMSHELANA NATHI
Ifowuni&Wechat&Whatsup: +8618707335571
Umbuzo:info@retopcarbide.com
