Igama Lomkhiqizo:YL10.2 Izinduku ze-Tungsten Carbide
Ingxenye:Okuhle, Okumaphakathi, Okuqinile njengoba kudingeka
Ibanga:YL10.2 K10.K20.
Izici:ukunemba okuphezulu, Ground h5, h6, h7
Isitoko:isitokwe esanele sosayizi ojwayelekile kanye nebanga
Incazelo:
Kwa-Retop Carbide, sinikezela ngezinduku ze-tungsten carbide zekhwalithi ephezulu ezibhekelela uhla olubanzi lwezinhlelo zokusebenza zezimboni. Izinduku zethu zitholakala ngamamaki ahlukahlukene kanye nosayizi bezinhlayiyana, ukuqinisekisa ukuthi uthola isixazululo esiphelele sezidingo zakho ezithile.
1.Ukunemba okuphezulu:Izinduku zethu ze-tungsten carbide zenziwa ngokulawulwa kwekhwalithi okuqinile, okuqinisekisa ukuthi zihlangabezana nezindinganiso eziphakeme zokunemba. Atholakala ku-Ground h5, h6, kanye ne-h7 tolerances, alungele izinhlelo zokusebenza ezihlukahlukene zemishini nezamathuluzi.
2.Ukuqina Okukhethekile:I-Tungsten carbide idume ngobulukhuni bayo obumangalisayo nokumelana nokugqoka. Izinduku zethu zenziwe ngezinto ezisezingeni eliphezulu, eziqinisekisa ukuthi zinikeza ukusebenza okuhlala isikhathi eside ezindaweni ezidinga kakhulu.
3.Izicelo Ezihlukahlukene:Izinduku zethu ze-tungsten carbide zilungele ukusetshenziswa okubanzi, okuhlanganisa izigayo zokugcina, izinsimbi, izinsimbi ezivuselelwa kabusha, namathuluzi okusika okusebenza ngensimbi, ukwenza izinkuni, nezimboni zezimoto.
4.Izixazululo ezenziwe ngokwezifiso:Siyaqonda ukuthi zonke izidingo zekhasimende zihlukile. Yingakho sinikeza izinketho customizable for kuyizinhlayiyana
Imininingwane:
| Igama: | Induku ye-tungsten carbide |
| amanye amagama: | i-carbide rod enosimende, imigoqo ye-carbide, i-unground carbide rod, i-carbide rod eqediwe, izinti ze-tungsten carbide ezinezimbobo |
| Unground carbide rod: | Ububanzi 0.7- 45mm, ubude 330/310mm |
| Izinduku ezinembobo yokupholisa emaphakathi: | Ububanzi 4.5-20mm, ubude 330/310mm |
| Izinduku ezinezimbobo ezipholile ezi-2 ze-helical: | OD3.3 – 20.3mm, ID0.4 – 2.0mm, ubude 330mm |
| Izinduku ezinezimbobo zokupholisa ezimbili eziqondile: | OD3.4 – 20.7mm, ID0.4 – 2.0mm, Ubude 330mm |
| Isitoko: | I-inventory eyanele yosayizi ojwayelekile kanye nebanga |
| Ubuso: | aphansi noma aqediwe ayatholakala |
Ishadi Lebanga le-tungsten carbide rod:
| Ibanga le-ISO | Hlanganyela | K10-K20 | K20-K40 | K20-K40 | K20-K40 | K05-K10 | K40-K50 |
| I-WC + enye i-carbide | % | 91 | 90 | 88 | 88 | 93.5 | 85 |
| Co | % | 9 | 10 | 12 | 12 | 6.5 | 15 |
| WC usayizi wokusanhlamvu | μm | 0.4 | 0.8 | 0.6 | 0.4 | 0.6 | 0.8 |
| Ukuminyana | g/㎝³ | 14.5 | 14.42 | 14.12 | 14.1 | 14.85 | 13.95 |
| Ukuqina | Hv30 | 1890 | 1600 | 1580 | 1750 | 1890 | 1350 |
| Ukuqina | HRA | 93.5 | 91.5 | 91.2 | 92.5 | 93.5 | 89.5 |
| TRS | N/mm² | 3800 | 4100 | 4200 | 4400 | 3700 | 3800 |
| Ukuqina kokuphuka | Mpa.m½ | 10.2 | 14.2 | 14.7 | 13.5 | 10.1 | 17.5 |
| amandla okucindezela | kpsi | 1145 | 1015 | 1010 | 1109 | 1156 | 957 |
Kungani Usikhethe:
1. Ungathola impahla ephelele ngokuvumelana nemfuneko yakho okungenani inani elingenzeka.
2. Siphinde sinikeze ama-Reworks, i-FOB, i-CFR, i-CIF, nezintengo zokudiliva umnyango nomnyango. Siphakamisa ukuthi wenze isivumelwano sokuthunyelwa okuzokonga kakhulu.
3. Izinto esizihlinzekayo zingaqinisekiswa ngokuphelele, kusukela kusitifiketi sokuhlolwa kwempahla engavuthiwe kuya esitatimendeni sobukhulu bokugcina.(Imibiko izovela ngokwemfuneko)
4. isiqinisekiso sokunikeza impendulo phakathi namahora angu-24(imvamisa ngehora elifanayo)
5. Ungathola ezinye izindlela zesitoko, ukulethwa komshini ngokunciphisa isikhathi sokukhiqiza.
6. Sizinikele ngokugcwele kumakhasimende ethu. Uma kungeke kwenzeke ukuhlangabezana nezidingo zakho ngemva kokuhlola zonke izinketho, ngeke sikudukise ngokwenza izithembiso ezingamanga ezizodala ubudlelwano obuhle namakhasimende.
Izimboni kanye nemibukiso
XHUMANA NATHI
Ucingo&Wechat&Whatsup: +8618707335571
Umbuzo:info@retopcarbide.com
